BBPMK - M-BOND 600 ADHESIVE
- MSDS: BBPMK
- Manufacturer: MEASUREMENTS GROUP(FORMERLY VISHAY GROUP RALEIGH)
- Product Name: M-BOND 600 ADHESIVE
- National Stock Number: 8040-00F004102
Product Identification
Product ID:M-BOND 600 ADHESIVE
MSDS Date:07/10/1995
FSC:8040
NIIN:00F004102
MSDS Number: BBPMK
Responsible Party
WENDELL, NC 27591-5000
US
Emergency Phone: 919-365-3800
Info Phone: 919-365-3800
Preparer: R L FRIDLEY
Cage: 88952
Contractor
Telephone: 919-365-3800
Cage: 88952
Ingredients
TETRAHYDROFURAN
CAS: 109-99-9
RTECS: LU5950000
Fraction By Weight: 50.2%
OSHA PEL 200 PPM
ACGIH TLV: 590 MG/CUM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PHENOL, POLYMER WITH FORMALDEHYDE, GLYCIDYL ETHER *98-2*
CAS: 28064-14-4
Fraction By Weight: 42.6%
METHYL ETHYL KETONE, 2-BUTANONE *98-2*
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 7.2%
OSHA PEL 200 PPM
ACGIH TLV: 590 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
LD50 LC50 Mixture:ORAL LD50(RAT): 2737 MG/KG (SEE SUPP)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MAY CAUSE RESPIRATORY
FAILURE, CNS DEPRESSION. EYES/SKIN: SEVERE IRRITATION/BURNS.
INGESTION: MAY AFFECT THE GASTROINTESTINAL. OVEREXPOSURE MAY RESULT
IN KIDNEY/LIVER DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:HEADACHE, NAUSEA, VOMITING, DIZZINESS,
NARCOSIS, LOW BLOOD PRESSURE, COUGHING, DIFFICULT BREATHING,
IRRITATION, BURNS
Medical Cond Aggravated by Exposure:SKIN DISORDERS, RESPIRATORY SYSTEM
DISEASE.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF
NECESSARY. EYES: IMMEDIATELY FLUSH W/PLENTY OF WATER FOR 15 MINS.
SKIN: FLUSH W/WATER. INGESTION: DON'T INDUCE VOMITING. IF
CONSCIOUS, GIVE LARGE AM OUNTS OF WATER. OBTAIN MEDICAL ATTENTION
IN ALL CASES.
Fire Fighting
Flash Point Method:PMCC
Flash Point:6F
Lower Limits:1.8
Upper Limits:11.8
Extinguishing Media:ALCOHOL FOAM, DRY CHEMICAL/CO2. WATER MAY BE
INEFFECTIVE.
Fire Fighting Procedures:USE PROTECTIVE EQUIPMENT & SCBA W/FULL
FACEPIECE OPERATED IN POSITIVE PRESSURE MODE. MOVE CONTAINERS
SAFELY. USE WATER TO KEEP FIRE EXPOSED CONTAINERS COOL.
Unusual Fire/Explosion Hazard:VAPORS MAY FLOW ALONG SURFACES TO
IGNITION SOURCE & FLASH BACK. CLOSED CONTAINERS EXPOSED TO HEAT MAY
EXPLODE. CONTACT W/STRONG OXIDIZERS MAY CAUSE FIRE. (SUPP)
Accidental Release
Spill Release Procedures:USE SCBA/PROTECTIVE CLOTHING. SHUT OFF
IGNITION SOURCES. STOP LEAK SAFELY W/O RISK. USE WATER SPRAY TO
REDUCE VAPORS. TAKE UP W/SAND/OTHER NON-COMBUSTIBLE ABSORBENT
MATERIAL & PLACE INTO CONTAINER FOR DISPOSAL. FLUSH AREA W/WATER.
Handling
Handling and Storage Precautions:KEEP CONTAINERS TIGHTLY CLOSED. STORE
IN A COOL, DRY, WELL VENTILATED, FLAMMABLE LIQUID STORAGE AREA.
KEEP PRODUCT OUT OF LIGHT.
Other Precautions:AVOID PROLONGED EXPOSURE TO VAPORS & SKIN CONTACT.
AVOID FLARES, SMOKING/FLAMES IN AREA.
Exposure Controls
Respiratory Protection:RESPIRATORY PROTECTION REQUIRED IF AIRBORNE
CONCENTRATION EXCEEDS TLV. AT CONCENTRATIONS UP TO 1000 PPM, USE A
CHEMICAL CARTRIDGE RESPIRATOR W/ORGANIC VAPOR CARTRIDGE. ABOVE THIS
LEVEL, USE A SELF CON TAINED BREATHING APPARATUS.
Ventilation:LOCAL EXHAUST/MECHANICAL: TO KEEP BELOW TLV.
Protective Gloves:NEOPRENE
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:IMPERVIOUS OVER CLOTHING, SAFETY SHOWER, EYE
WASH STATION
Work Hygienic Practices:WASH THOROUGHLY AFTER USING.
Supplemental Safety and Health
FIRE HAZ CONT'D: MAY FORM EXPLOSIVE PEROXIDES ESPECIALLY WHEN HEATED.
ORAL LD50 INFORMATION IS FOR METHYL ETHYL KETONE.
Chemical Properties
Boiling Pt:B.P. Text:151F
Vapor Pres:145
Vapor Density:2.5
Spec Gravity:0.9
VOC Pounds/Gallon:598
Evaporation Rate & Reference:(BU AC = 1): 14.5
Solubility in Water:APPRECIABLE
Appearance and Odor:COLORLESS LIQUID, ETHER LIKE ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG BASES, STRONG REDUCING AGENTS.
Stability Condition to Avoid:HEAT, FLAME, LIGHT, AIR & OTHER SOURCES OF
IGNITION
Hazardous Decomposition Products:CO, CO2, EXPLOSIVE PEROXIDES
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Other Information
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.