BBPPF - FREEMAN TUF-FIL ALUMINUM

  • MSDS: BBPPF
  • Manufacturer: FREEMAN MFG AND SUPPLY
  • Product Name: FREEMAN TUF-FIL ALUMINUM
  • National Stock Number: 6850-00F004139
Product Identification

Product ID:FREEMAN TUF-FIL ALUMINUM
MSDS Date:01/01/1987
FSC:6850
NIIN:00F004139
MSDS Number: BBPPF

Responsible Party
FREEMAN MFG & SUPPLY/CLEVELAND, OH 44102

Emergency Phone: (216) 961-4200

Cage: EO795

Contractor
FREEMAN MFG AND SUPPLY CO
AVON, OH 44011 US

Telephone: 440-934-1902

Cage: 1F275

Ingredients

POLYESTER RESIN

Fraction By Weight: <50%


STYRENE, MONOMER (SARA III)

CAS: 100-42-5

RTECS: WL3675000

Fraction By Weight: 25%

OSHA PEL 100 PPM

ACGIH TLV: S,50PPM/100STEL;9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


IRON OXIDE

RTECS: NO7525000

Fraction By Weight: <5%

ACGIH TLV: 10 MG/CUM


IRON OXIDE

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: <10%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293


TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: <10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

Hazards

Effects of Overexposure:SKIN: MILDLY IRRITATING. STRONG CONCENTRATIONS
IRRITATE EYES/RESP. TRACT.

First Aid

First Aid:INHALATION: REMOVE VICTIM TO A WELL VENTILATED AREA, MAKE
COMFORTABLY WARM BUT NOT HOT. USE OXYGEN OR ARTIFICIAL RESPIRATION
AS REQUIRED. IN CASE OF EYE CONTACT, FLUSH WITH COPIOUS AMOUNTS OF
WATER FO R 15 MINUTES/SEEK MEDICAL ATTENTION.

Fire Fighting

Flash Point:200F (COC)
Lower Limits:1.1%
Upper Limits:6.1%
Extinguishing Media:FOAM, CO2 OR DRY CHEMICAL
Fire Fighting Procedures:WEAR SCBA TO AVOID INHALATION OF SMOKE OR
VAPORS.
Unusual Fire/Explosion Hazard:IF THIS OCCURS IN A CLOSED CONTAINERS,
THERE IS A POSSIBILITY OF VIOLENT RUPTURE.

Accidental Release

Spill Release Procedures:REMOVE SATURATED CLOTHING PROMPTLY AND WASH
AFFECTED AREAS WITH SOAP/WATER. REMOVE A SOURCES OF IGNITION.
VENTILATE AREA. ABSORB WITH INERT MATERIALS SUCH AVERMICULITE OR
SAND/PLACE IN A CLOSED CONTAI NER.

Handling

Handling and Storage Precautions:AVOID STORAGE >100F. AVOID PROLONGED
OR REPEATED SKIN CONTACT/INHALATION OF HEATED VAPOR OR SPY MISTS.
Other Precautions:AVOID IMPROPER ADDITION OF PROMOTER/CATALYST. A
PROMOTER/CATALYST USED WITH THIS PRODUCT SHOULD ALWAYS BE MIXED
SEPARATELY WH THE PRODUCT/MUST NEVER BE MIXED TOGETHER.

Exposure Controls

Respiratory Protection:PREVENT INHALATION OF HEATED VAPORS/SPRAY
MISTS/IF TLV IS EXCEEDED.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV.
Protective Gloves:PLASTIC/RUBBER
Eye Protection:FACE SHIELD/GOGGLES
Other Protective Equipment:SAFETY SHOWER AND EYE WASH STATION SHOULD BE
AVAILABLE
Supplemental Safety and Health
MSDS DATE: 21 APR 1986.

Chemical Properties

Vapor Density:3.6
Spec Gravity:1.936
Solubility in Water:INSOLUBLE
Appearance and Odor:SMOOTH PASTE, STYRENE ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT AND DIRECT SUNLIGHT.
Hazardous Decomposition Products:CO/CO2/LOW MOLECULAR WEIGHT
HYDROCARBONS/ORGANIC ACIDS.
Conditions to Avoid Polymerization:SUNLIGHT, OPEN FLAMES AND
CONTAMINATION

Disposal

Waste Disposal Methods:INCINERATE IN AN APPROVED INCINERATOR OR DISPOSE
OF IN A CHEMICAL DUMP IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.