BBPWR - CARRIAGE FLAT ACRYLIC HOUSE PAINT/#24 BLAC

  • MSDS: BBPWR
  • Manufacturer: BRUNING PAINT
  • Product Name: CARRIAGE FLAT ACRYLIC HOUSE PAINT/#24 BLAC
  • National Stock Number: 8010-00F004270
Product Identification

Product ID:CARRIAGE FLAT ACRYLIC HOUSE PAINT/#24 BLAC
MSDS Date:01/01/1987
FSC:8010
NIIN:00F004270
MSDS Number: BBPWR

Responsible Party
BRUNING PAINT/BALTIMORE, MD 21224

Emergency Phone: (301) 342-3641

Cage: EO841

Contractor
KYANIZE PAINT
BALTIMORE, MD 21224 US

Telephone: 800-368-2076

Cage: 85520

Ingredients

SILICON DIOXIDE

RTECS: VV7320000

Fraction By Weight: 35%

ACGIH TLV: .10 MG/CUM


ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 1-5%

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

Effects of Overexposure:CONTACT WITH EYES OR SKIN MAY CAUSE IRRITATION.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/WATER FOR AT
LEAST 15 MINUTES. SKIN: REMOVE WITH SOAP/WATER. REMOVE CONTAMINATED
CLOTHING. INGESTION: DRINK 1 OR 2 GLASSES OF WATER. DON'T INDUCE
VOMITIN G, CONSULT PHYSICIAN IMMEDIATELY.

Fire Fighting

Fire Fighting Procedures:WATER COOL CONTAINERS TO PREVENT PRESSURE
BUILDUP/EXPLOSION.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE DUE TO
PRESSURE BUILD-UP WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:DIKE/ABSORB SPILL WITH INERT MATERIAL
(SAND/VERMICULITE, ETC). AND TRANSFER TO CONTAER FOR DISPOSAL. WASH
UP RESIDUE WITH SOAP AND WATER.

Handling

Handling and Storage Precautions:KEEP FROM FREEZING. DON'T STORE >120F.
Other Precautions:CLOSE CONTAINER AFTER EACH USE. KEEP OUT OF REACH OF
CHILDREN.

Exposure Controls

Respiratory Protection:APPROVED MECH FILTER RESP TO REMOVE SOLID
AIRBORNE OF OVERSPRAY
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV.
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES/SAFETY EYEWEAR
Other Protective Equipment:USE PETROLEUM JELLY WHERE PROLONGED SKIN
CONTACT IS LIKELY.
Supplemental Safety and Health
MSDS DATE: 20 AUG 86. WT/GAL: 10.6.

Chemical Properties

Boiling Pt:B.P. Text:490F
Vapor Pres:.08
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN BU AC
Percent Volatiles by Volume:62.4

Stability

Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:CO AND CO2 WHEN BURNED.

Disposal

Waste Disposal Methods:LANDFILL ACCORDING TO FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.