BBPXJ - HYLOMAR PL32 H(HEAVY)

  • MSDS: BBPXJ
  • Manufacturer: BENTLEY MARSTON INC
  • Product Name: HYLOMAR PL32 H(HEAVY)
  • National Stock Number: 8030-01-015-9246
Product Identification

Product ID:HYLOMAR PL32 H(HEAVY)
MSDS Date:09/26/1986
FSC:8030
NIIN:01-015-9246
MSDS Number: BBPXJ

Responsible Party
BENTLEY MARSTON INC.
1820 STAR BATT DRIVE EAST
ROCHESTER, MI 48063

Emergency Phone: (313) 852-6730

Info Phone: (313) 852-6730

Cage: 0EPH9

Contractor
MARSTON BENTLEY
UNKNOW ROCHESTER, MI 48063

Telephone: (313) 852-6730

Cage: MARBT

Ingredients

METHYLENE CHLORIDE (SARA III)

CAS: 75-09-2

RTECS: PA8050000

Fraction By Weight: 43%

OSHA PEL 500 PPM/C,1000; Z2

ACGIH TLV: 50 PPM, A2; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: PROLONGED CONTACT MAY CAUSE
IRRITATION. INHALATION: HEADACHE, DIZZINESS
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: PROLONGED CONTACT MAY CAUSE IRRITATION.
INHALATION: HEADACHE, DIZZINESS.
Medical Cond Aggravated by Exposure:BRONCHIAL

First Aid

First Aid:EYES: WASH WITH WATER. SKIN: WASH WITH SOAP & WTER.
INGESTION: GIVE MILK OR WATER TO DRINK. INHALATION: REST IN FRESH
AIR, SEEK MEDICAL AID.

Fire Fighting

Flash Point Method:COC
Flash Point:265C
Lower Limits:13%
Upper Limits:22%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL

Accidental Release

Spill Release Procedures:ALLOW SOLVENT TO EVAPORATE AND SCRAPE UP
PUTTY.

Handling

Handling and Storage Precautions:STORE AT CONSTANT TEMPERATURE 5 &
35C.
Other Precautions:NO FURTHER PRECAUTIONS ARE THOUGHT TO BE NECESSARY.

Exposure Controls

Respiratory Protection:NOR NORMALLY REQUIRED
Ventilation:NOT REQUIRED
Protective Gloves:NOT NECESSARY
Eye Protection:NOT NORMALLY REQUIRED
Other Protective Equipment:NONE
Work Hygienic Practices:NORMAL PERSONAL HYGIENE
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:40C
Vapor Pres:400
Vapor Density:2.9
Spec Gravity:1.3
Evaporation Rate & Reference:(BU AC = 1): 25
Solubility in Water:INSOLUBLE
Appearance and Odor:BLUE GEL; ODOR OF METHYLENE CHLORIDE

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:ABNORMALLY HIGHT TEMPERATURES
Hazardous Decomposition Products:CHLORINE MAY BE PRODUCED AT ABNORMALLY
HIGH TEMPERATURES

Disposal

Waste Disposal Methods:WITH FACTORY REFUSE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.