BBTCN - W2200MT WONDER-TONES INTERIOR ACRYLIC SEMI-GLOSS ENAMEL

Product Identification

Product ID:W2200MT WONDER-TONES INTERIOR ACRYLIC SEMI-GLOSS ENAMEL
MSDS Date:07/01/1985
FSC:8010
NIIN:00F005729
MSDS Number: BBTCN

Responsible Party
AMERITONE PAINT CORP SUB GROW GRP INC
18414 S SANTA FE AVE
LONG BEACH, CA 90801
US

Emergency Phone: 213-639-6791

Info Phone: 213-639-6791

Cage: FO133

Contractor
DEEN PIERCE PAINT CO INC
PLEASANT HILL, CA 94523 US

Telephone: 510-696-3699;510-430-0270

Cage: DEENP

Ingredients

1,2-PROPANEDIOL (PROPYLENE GLYCOL)

CAS: 57-55-6

RTECS: TY2000000

Fraction By Weight: 5%


AMMONIUM HYDROXIDE, AQUA AMMONIA

CAS: 1336-21-6

RTECS: BQ9625000

Fraction By Weight: <1%

ACGIH TLV: 25 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


PROPANOIC ACID, 2-METHYL, MONOESTER

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: <5%


TITANIUM DIOXIDE, TIO2

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 5-25%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


ALUMINUM SILICATE, KAOLINITE *92-4*

CAS: 1318-74-7

Fraction By Weight: 5%


9.2-10.6

RTECS: 9999999WG


133.244 GM/L

RTECS: 9999999VO

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESPIRATORY TRACT
IRRITATION, HEADACHE, NAUSEA, DIZZINESS. EYES/SKIN: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DUST DISEASE OF THE LUNGS.
CRYSTALLINE SILICA IS A KNOWN CAUSE OF SILICOSIS.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/PLENTY OF
WATER FOR AT LEAST 15 MINS. SKIN: REMOVE W/SOAP & WATER. INGESTION:
DRINK 1 OR 2 GLASSES OF WATER TO DILUTE. DON'T INDUCE VOMITING.
TREAT SYMPT OMATICALLY. OBTAIN MEDICAL ATTENTION INALL CASES.

Fire Fighting

Flash Point:NONE
Extinguishing Media:CO2, DRY CHEMICAL, FOAM OR OTHER NFPA APPROVED
METHOD FOR TREATING A CLASS B FIRE.
Fire Fighting Procedures:FULL PROTECTIVE EQUIP INCLUDING A SCBA. WATER
SPARY MAY BE INEFFECTIVE. IF WATER IS USED, FOG NOZZLES ARE
PREFERABLE. USE WATER TO COOL FIRE EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:DUE TO PRESSURE BUILD UP, CLOSED
CONTAINERS EXPOSED TO EXTREME HEAT MAY EXPLODE.

Accidental Release

Spill Release Procedures:WASH W/WATER. CONTAIN SPILLED MATERIAL &
REMOVE W/INERT ABSORBENT. STORE IN CLOSED CONTAINER UNTIL PROPERLY
DISPOSED OF.

Handling

Handling and Storage Precautions:STORE <110F & KEEP FROM FREEZING. KEEP
CONTAINER CLOSED WHEN NOT IN USE. DON'T REUSE EMPTY CONINERS. KEEP
OUT OF REACH OF CHILDREN.
Other Precautions:DON'T TRANSFER CONTENTS TO BOTTLES OR OTHER
UNLABELLED CONTAINERS. DON'T BREATHE VAPORS, SPRAY MIST OR SANDING
DUST. DON'T GET IN EYES.

Exposure Controls

Respiratory Protection:IN OUTDOOR OR OPEN AREAS W/UNRESTRICTED
VENTILATION & DURING SANDING/GRINDING OPERATIONS, USE NIOSH/MSHA
MECHANICAL FILTER RESPIRATOR. WHEN USED IN RESTRICTED VENTILATION
USE NIOSH/MSHA CHEMICAL/MECHA NICAL FILTER RESPIRATOR. SEE
SUPP.
Ventilation:GENERAL DILUTION OR LOCAL EXHAUST VENTILATION IN VOLUME &
PATTERN TO KEEP BELOW TLV.
Protective Gloves:AS REQUIRED
Eye Protection:SAFETY EYEWEAR W/SPLASH GUARD/SIDESHIELD
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS BEFORE EATING, SMOKING OR USING THE WASHROOM.
Supplemental Safety and Health
RESPIRATORY PROTECTION CON'T: WHEN USED IN CONFINED AREAS, USE
NIOSH/MSHA AIR SUPPLY RESPIRATOR OR HOOD. USE NIOSH/MSHA APPROVED
RESPIRATORS WHEN FLAME CUTTING, WELDING, BRAZING & SANDING MATERIAL
COA TED W/THIS PRODUCT.

Chemical Properties

Boiling Pt:B.P. Text:212-369F
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:68-73

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EXTREME HEAT, FREEZING
Hazardous Decomposition Products:FUMES MAY CONTAIN CO, CO2, OXIDES OF
NITROGEN

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. INCINERATE ONLY IN APPROVED FACILITY. DON'T
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.