BBTZK - H #2690 ALLOY
- MSDS: BBTZK
- Manufacturer: CABOT WROUGHT PRODUCTS DIV
- Product Name: H #2690 ALLOY
- National Stock Number: 3439-00F006143
Product Identification
Product ID:H #2690 ALLOY
MSDS Date:01/01/1987
FSC:3439
NIIN:00F006143
MSDS Number: BBTZK
Responsible Party
Emergency Phone: (215) 921-5000
Cage: FO173
Contractor
Telephone: 508-663-3455
Cage: FO173
Ingredients
CHROMIUM (SARA III)
CAS: 7440-47-3
RTECS: GB4200000
Fraction By Weight: 5.0%
OSHA PEL 1 MG/M3
ACGIH TLV: 0.5 MG/M3; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
MOLYBDENUM
CAS: 7439-98-7
RTECS: QA4680000
Fraction By Weight: 24%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3; 9293
IRON ION (FE +2)
CAS: 15438-31-0
RTECS: NO6925000
Fraction By Weight: 6.0%
OSHA PEL 1 MG/M3 (FE)
ACGIH TLV: 1 MG/M3 (FE); 8990
NICKEL (SARA III)
CAS: 7440-02-0
RTECS: QR5950000
Fraction By Weight: 63%
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3; 9192
COBALT (SARA III)
CAS: 7440-48-4
RTECS: GF8750000
Fraction By Weight: 2.5%
OSHA PEL 0.1 MG/M3;AS CO
ACGIH TLV: 0.05 MG/M3;DUST 9293
Hazards
Effects of Overexposure:INHALATION OF DUST/MISTS/FUMES ARE RESP
IRRITANTS & MAY CAUSE PNEUMONITIS. SKIN & EYE IRRITATION.
First Aid
First Aid:EYE: FLUSH W/WATER FOR 15 MINUTES THEN GET MED ATT. SKIN:
FLUSH W/WATER, WASH W/SOAP & WATER, GET MED ATT IF IRRITATION
PERSISTS. INHALATION: MOVE TO FRESH AIR, GET MEDICAL ATTENTION IF
DISCOMFORT PER SISTS. INGESTION: GET MED ATT IMMEDIATELY.
Fire Fighting
Extinguishing Media:DRY POWDER, SAND, DOLOMITE, GRAPHITE
Fire Fighting Procedures:RESPIRATOR SHOULD BE WORN TO MINIMIZE
EXPOSURE.
Unusual Fire/Explosion Hazard:NONE
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED RESP SHOULD THE OSHA TLV'S BE
EXCEEDED.
Ventilation:LOCAL SHOULD BE USED WHEN DUST/MIST/FUME EXCEEDS TLV.
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Supplemental Safety and Health
MSDS UNDATED. ALSO CONTAINS: SILICON (VW0450000) 1.0%, MANGANESE
(OM2100000) 1.0%, CARBON (FF5250100) 0.12%. MELTING PT: 20F.
Chemical Properties
Appearance and Odor:SOLID - GREY COLOR
Stability
Stability Indicator/Materials to Avoid:YES
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.