BBVCC - SPEEDHIDE LATEX DEEPTONE BASE, 6-652

  • MSDS: BBVCC
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: SPEEDHIDE LATEX DEEPTONE BASE, 6-652
  • National Stock Number: 8010-00F006177
Product Identification

Product ID:SPEEDHIDE LATEX DEEPTONE BASE, 6-652
MSDS Date:01/01/1987
FSC:8010
NIIN:00F006177
MSDS Number: BBVCC

Responsible Party
PPG INDUSTRIES, INC/PITTSBURGH, PA 15238

Emergency Phone: (304) 843-1300

Cage: DO894

Contractor
PPG INDUSTRIES, INC.
9 ALLISON PARK, PA 15101 US

Telephone: 412-592-5555

Cage: DO894

Ingredients

SILICA, AMORPHOUS, DUST

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 15%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3; 8990


ZINC OXIDE

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 1%

OSHA PEL 15MG/M3 TDUST/5 FUME

ACGIH TLV: 10MG/M3 TDUST; 9293


TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 5 - 10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 1%

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 50 - 55%

Hazards

Effects of Overexposure:INGESTION: HARMFUL OR FATAL IF SWALLOWED.
IRRITATES THE EYES, NOSE & THROAT.

First Aid

First Aid:INGESTION: DON'T INDUCE VOMITING. EYE: FLUSH W/PLENTY OF
WATER FOR AT LEAST 15 MINUTES. SKIN: WASHING W/SOAP & WATER.
INHALATION: REMOVE TO FRESH AIR. APLY ARTIFICIAL RESPIRATION.
CONTACT PHYSICIAN IM MEDIATELY.

Fire Fighting

Lower Limits:0.0%
Extinguishing Media:CO2, DRY CHEMICAL OR UNIVERSAL AQUEOUS FILM FORMING
FOAM.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. FOG NOZZLES
ARE PREFERABLE.
Unusual Fire/Explosion Hazard:WATER SPRAY CLOSED CONTAINERS TO PREVENT
PRESSURE BUILD-UP/EXPLOSION/BURSTING/AUTOIGNITION/WEAR SCBA

Accidental Release

Spill Release Procedures:PROVIDE MAXIMUM VENT. ONLY PERSONNEL EQUIPPED
W/PROPER RESPIRATORY/SKIN/EYE PROTECTI SHOULD BE PERMITTED IN THE
AREA. REMOVE ALL SOURCES OF IGNITION. TAKE USPILLED MATERIAL
W/SAWDUST/VERMICULITE/ABSOR BENT MATERIAL/PLACE INTO CONINERS.

Handling

Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE QTYS IN
BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASIIIB
COMBUSTIBLE LIQUIDS. PROTECT FROM FREEZING.

Exposure Controls

Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE A SUITABLE
RESPIRATOR.
Protective Gloves:NITRILE/NEOPREN
Eye Protection:CHEMICAL-SPLASH GOGGLES
Other Protective Equipment:WEAR PROTECTIVE CLOTHING/IMPERMEABLE
APRON/LATEX RUBBER.
Supplemental Safety and Health
9/25/86. WT/GAL: 10.33. % SOLID BY WT: 47.4. ALSO CONTAINS: SILICA,
AMORPHOUS-FUSED (VV7320000) 5%, 2,2,4-TRIMETHYL 1,3-PEANEDIOL
ISOBUTYRATE 1%, FILM FORMERS, RESINS & ADDITIVES 15%.

Chemical Properties

Boiling Pt:B.P. Text:100-244C
Vapor Pres:17.
Vapor Density:>AIR
Evaporation Rate & Reference:(BUOAC=100): 33
Solubility in Water:52.3
Percent Volatiles by Volume:64.5

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES/MINERAL ACIDS/STRONG OXIDIZING AGENTS._
Hazardous Decomposition Products:CO

Disposal

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, & LOCAL ENVIRONMENTAL CONTROL REGULATIONS.
EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN
APPROVED WASTE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.