BBXZX - 37 89W71K HB EP TINT BASE LIGHT
- MSDS: BBXZX
- Manufacturer: VALSPAR CORP
- Product Name: 37 89W71K HB EP TINT BASE LIGHT
- National Stock Number: 8010-00F007462
Product Identification
Product ID:37 89W71K HB EP TINT BASE LIGHT
MSDS Date:01/01/1987
FSC:8010
NIIN:00F007462
MSDS Number: BBXZX
Responsible Party
Emergency Phone: (612) 332-7371
Cage: FO278
Contractor
Telephone: 612-332-7371/888-345-5732
Cage: 23526
Ingredients
VM&P NAPHTHA (SEE SUPPLEMENTAL FOR INGREDIENTS)
RTECS: QI6180000
Fraction By Weight: 1%
ACGIH TLV: 300 PPM
TALC (CONTAINING NO ASBESTOS)
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: 1 - 5%
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST; 9192
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 45%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
N-BUTYL ACETATE (SARA III)
CAS: 123-86-4
RTECS: AF7350000
Fraction By Weight: 10%
OSHA PEL 150 PPM/200 STEL
ACGIH TLV: 150 PPM/200STEL;9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 5 - 10%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Effects of Overexposure:RESPIRATORY IRRITATION, DIZZINESS, NAUSEA, LOSS
OF CONSCIOUSNESS.
First Aid
First Aid:INHALATION: REMOVE FROM EXPOSURE AREA. IF BREATHING HAS
STOPPED, USE MOUTH-TO-MOUTH RESUSCITATION & GET MED ATT. EYE: FLUSH
WITH WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
Fire Fighting
Flash Point:50F
Lower Limits:0.70
Upper Limits:12.0
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, & WATER FOG
Fire Fighting Procedures:SCBA/AIR MASKS. COOL EXPOSED CONTAINERS
W/WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:VENTILATE AREA. AVOID BREATHING OF VAPORS. USE
SCBA OR AIRMASK FOR LARGE SPILLS IN AONFINED AREA. ELIMINATE
IGNITION SOURCES. REMOVE W/INERT ABSORBENT & NONPARKING TOOLS.
AVOID CONTACT W/EYES.
Handling
Handling and Storage Precautions:CONTAINERS SHOULD BE GROUND WHEN
POURING. AVOID FREE FALL OF LIQUID IN EXCESS OF A FEW INCHES.EEP
CONTAINER CLOSED WHEN NOT IN USE.
Other Precautions:EMPTY CONTAINER MAY CONTAIN PRODUCT RESIDUE,
INCLUDING FLAMMABLE/EXPLOSIVE VAPORS. DON'T CUT, PUNCTURE OR WELD
ON OR NEAR COAINER. DON'T STORE >120 F. KEEP AWAY FROM
HEAT/SPARKS/FLAMES.
Exposure Controls
Respiratory Protection:WEAR APPROPRIATE, FITTED RESPIRATOR (NIOSH/MSHA
APPROVED).
Ventilation:IN A CONFINED AREA, VENT. SHOULD BE EXPLOSION PROOF.
Protective Gloves:RUBBER
Eye Protection:GLASSES
Other Protective Equipment:USUAL CLOTHING FOR PAINTING OPERATIONS.
Supplemental Safety and Health
MSDS DATE: 07/11/86. ALSO CONTAINS: EPOXY RESIN (1000131ER) 30%,
N-BUTYL ALCOHOL (EO1400000) 1%, BUTYL CELLOSOLVE (KJ85750) 1%.
Chemical Properties
Boiling Pt:B.P. Text:173F
Vapor Pres:91.
Vapor Density:4.10
Spec Gravity:1.56
Evaporation Rate & Reference:(BU AC = 1): 3.80
Appearance and Odor:NORMAL FOR A COATINGS PRODUCT.
Percent Volatiles by Volume:38.4
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, SPARKS & OPEN FLAMES.
Hazardous Decomposition Products:CO2, CO
Disposal
Waste Disposal Methods:DISPOSE IN CHEMICAL DISPOSAL AREA OR IN A MANNER
THAT COMPLIES W/LOCAL, STATE, & FEDERAL REGULATIONS. DON'T
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.