BBYKH - TIN/LEAD
- MSDS: BBYKH
- Manufacturer: M C CANFIELD SONS
- Product Name: TIN/LEAD
- National Stock Number: 3439-00F007612
Product Identification
Product ID:TIN/LEAD
MSDS Date:01/01/1987
FSC:3439
NIIN:00F007612
MSDS Number: BBYKH
Responsible Party
UNION, NJ 07083
Emergency Phone: (201) 688-5050
Info Phone: (201) 688-5050
Cage: OO186
Contractor
Telephone: (201) 688-5050
Cage: OO186
Ingredients
LEAD (SARA III)
CAS: 7439-92-1
RTECS: OF7525000
Fraction By Weight: 1-99%
OSHA PEL 0.05 MG/M3;1910.1025
ACGIH TLV: 0.15 MG/M3;DUST 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
TIN
CAS: 7440-31-5
RTECS: XP7320000
Fraction By Weight: 1-99%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3; 9192
ZINC CHLORIDE (SARA III)
CAS: 7646-85-7
RTECS: ZH1400000
OSHA PEL 1 MG/M3/2 STEL
ACGIH TLV: 1 MG/M3/2STEL FUME93
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
AMMONIUM CHLORIDE (SARA III)
CAS: 12125-02-9
RTECS: BP4550000
OSHA PEL 10 MG/M3/20 STEL
ACGIH TLV: 10 MG/M3 FUME; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:LEAD POISONING AFTER LONG-TERM EXTREME
EXPOSURE FROM INGESTION OR INHALATION OF COMPOUNDS OR FUMES.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:METALLIC TASTE ABDOMINAL PAIN, NAUSEA, JOINT OR
MUSCLE PAIN OR WEAKNESS. POSSIBLE LOSS OF WEIGHT, MENTAL CONFUSION,
LEAD LINE ON GUMS.
First Aid
First Aid:EYE/SKIN: FLUSH WITH WATER FOR 15 MINUTES. CALL PHYSICIAN
IMMEDIATELY. INGESTION: GIVE LARGE QUANTITIES OF WATER AND MILK;
DON'T INDUCE VOMITING. IF BURNED FROM MOLTEN MEAL, GIVE ORDINARY
BURN FIRST A ID. FLUX CAUSES BURNS ON CONTACT.
Fire Fighting
Fire Fighting Procedures:INEXTREMELY HIGH TEMPERATURE FIRES, LEAD MAY
EMIT TOXIC FUMES. USE A SELF-CONTAINED RESPIRATORY SYSTEM.
Unusual Fire/Explosion Hazard:MODERATE HAZARD WHEN HIGH CONCENTRATION
OF VERY FINE METALLIC DUST IS EXPOSED TO HIGH HEAT OR OPEN FLAME.
Accidental Release
Spill Release Procedures:NORMAL HOUSEKEEPING FOR SOLID METAL. METALLIC
POWDER OF DUST SHOULD BE VACUUMED OR WET SWEPT USING A RESPIRATOR
AND PROTECTIVE CLOTHING.
Handling
Handling and Storage Precautions:USE GOOD HOUSEKEEPING PRACTICES TO
PREVENT ACCUMULATING OF DUST & KEEP AIRBORNE DUST CONCENTRATING AT
A MINIMUM.
Other Precautions:AVOID BREATHING DUST OF FUMES. WASH HANDS AFTER
HANDLING. DO NOT SMOKE OR EXPOSE FOOD TO DUST. KEEP AREA CLEAN.
Exposure Controls
Ventilation:LOCAL EXHAUST: FUME HOOD OVER WORK AREA. MECHANICAL: 200
FT/MIN. AIR VELOCITY INTO HOOD OPENING.
Protective Gloves:NEAR MOLTEN OR HOT METAL
Eye Protection:SAFETY GLASSES, FACESHIELD
Other Protective Equipment:SAFETY EYEWASH STATIONS SHOULD BE IN CLOSE
PROXIMITY.
Work Hygienic Practices:WASH HANDS AFTER HANDLING. DON'T SMOKE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:650F FLUX
Vapor Pres:750
Spec Gravity:2.5 FLUX
Solubility in Water:INSOLUBLE
Appearance and Odor:METALLIC COLOR, GREY TO SHINY SILVERY GREY
Stability
Stability Indicator/Materials to Avoid:YES
MATERIAL MAY BE INCOMPATIBLE W/ACIDS, BASES, CYANIDES, SULFIDES, &
OXIDIZERS. MOLTEN METAL MAY REACT VIOLENTLY W/WATER.
Hazardous Decomposition Products:TEMPERATURE ABOVE THE MELTING POINT
MAY EMIT TOXIC FUMES.
Disposal
Waste Disposal Methods:SCRAPING DRIPPINGS AND DROSSES SHOULD BE STORED
IN A CLOSED CONTAINER AND RETURNED TO A LEAD RECYCLER. FOLLOW
FEDERAL, STATE AND LOCAL REGULATIONS REGARDING DISPOSAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.