BCBLC - TURCO DY-CHEK REMOVER LS(PSU)
- MSDS: BCBLC
- Manufacturer: TURCO PRODUCTS INC
- Product Name: TURCO DY-CHEK REMOVER LS(PSU)
- National Stock Number: 6850-00K000767
Product Identification
Product ID:TURCO DY-CHEK REMOVER LS(PSU)
MSDS Date:01/01/1985
FSC:6850
NIIN:00K000767
MSDS Number: BCBLC
Responsible Party
CARSON, CA 90749
US
Emergency Phone: 614-387-6200
Info Phone: 714-890-3600
Cage: D9808
Contractor
Telephone: 215-419-7890
Cage: D9808
Ingredients
ALIPHATIC PETROLEUM SOLVENT
Fraction By Weight: 70.0%
ACGIH TLV: 350 PPM
1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE (FREON 113) (SARA
CAS: 76-13-1
RTECS: KJ4000000
Fraction By Weight: 30.0%
OSHA PEL 1000PPM/1250STEL
ACGIH TLV: 1000PPM/1250STEL9192
CARBON DIOXIDE
CAS: 124-38-9
RTECS: FF6400000
Fraction By Weight: UNK
OSHA PEL 5000 PPM
ACGIH TLV: 5000PPM/30000STEL;93
Hazards
Effects of Overexposure:EYES:MOD IRRIT;SKIN:MILK
IRRIT:ING:NAUSEA,DIZZ,INH:GIDDINESS,SHORTNESS OF BREATH;POSS
CARDIAC ARRYTH
First Aid
First Aid:SKIN OR EYES:FLUSH W/WATER.IF IRRIT PERSISTS CALL A DR.ING:DO
NOT INDUCE VOMITING.CALL A DR.INH:REMOVE TO FRESH AIR.IF BREATHING
IS DIFFICULT GIVE OXYGEN.DO NOT GIVE EPINEPHRINE OR SIMILAR
DRUGS.CALL A DR.
Fire Fighting
Flash Point:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:NON-FLAMMABLE HOWEVER USE CO*2,FOAM,IN CASE OF
FIRE.
Fire Fighting Procedures:NONE KNOWN
Unusual Fire/Explosion Hazard:CONTENTS UNDER PRESSUR.EXPOSURE ABOVE
120F MAY CAUSE BURSTING.DO NOT PUNCTURE*SEE OTHER PRECAUSTINS.
Accidental Release
Spill Release Procedures:VENTILATED AREA ESPECIALLY LOW PLACES WHERE
HEAVY VAPORS MIGHT COLLECT.SOAK UP ON ABSORBENT MATERIALS.SWEEP
INTO SEALABLE CONTAINERS.
Handling
Handling and Storage Precautions:STORE CONTAINERS IN A CLEAN,DRY,AREA
AWAY FROM SUNLIGHT.DO NOT STORE ABOVE 120F.
Other Precautions:CNTD UNUSUAL FIRE*OR INCINERATE.AVOID CONTACT
W/WELDING ARCS,TORCHES,& OPEN FLAMES.HAZARDOUS GASES MAY BE FORMED.
Exposure Controls
Respiratory Protection:USE AIR MASK IN HIGH CONCENTRATIONR OR CONFINED
AREAS
Ventilation:LOCAL:WHEN LG AMTS ARE RELEASED.MECH(GEN):ESPEC IN LOW
PLACE
Protective Gloves:AS REQUIRED
Eye Protection:GOGGLES
Other Protective Equipment:NONE KNOWN
Supplemental Safety and Health
PHYSICAL DATA APPLIES TO MIXTURE OF INGREDIENTS PRIOR TO FILLING IN
AEROSOL CANS.CAS#8002-05-0 VS ALIPHATIC PET SOLVENT;CAS#76-13-1 VS
CCL:3CF*3(FREON 113)
Chemical Properties
HCC:V2
Boiling Pt:=47.8C, 118.F
Vapor Pres:100
Vapor Density:>1.0
Spec Gravity:0.927
Evaporation Rate & Reference:<1.0(BU ACETATE)
Solubility in Water:EMULSIFIABL
Appearance and Odor:LIGHT BROWN LIQUID,MILD ODOR
Percent Volatiles by Volume:97.0
Stability
Stability Indicator/Materials to Avoid:YES
ALKALI OR ALKALINE EARTH METALS-POWDERED AL, ZN, BERNLIUM ET
Stability Condition to Avoid:OPEN FLAME OR HIGH TEMPERATURE
Hazardous Decomposition Products:HYDROCHLORIC ACID,HDROFLUORIC
ACID,POSSIBLE PHOSGENE
Disposal
Waste Disposal Methods:DISPOSE OF IN APPROVED LANDFILL IAW APPLICABLE
FEDERAL,STATE,OR OCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.