BCDBW - M-PHENYLENEDIAMINE

Product Identification

Product ID:M-PHENYLENEDIAMINE
MSDS Date:01/01/1985
FSC:6810
NIIN:00K001532
MSDS Number: BCDBW

Responsible Party
E.I.DUPONT DE NEMOURS & CO,INC.
1007 MARKET STREET
WILMINGTON, DE 19899
US

Emergency Phone: 800-441-7515

Info Phone: 800-441-7515

Cage: DO229

Contractor
E.I.DUPONT DE NEMOURS & CO INC
1635 BOSTON, MA 02118 US

Telephone: 800-441-7515

Cage: DO229

Ingredients

M-PHENYLENEDIAMINE

CAS: 108-45-2

RTECS: SS7700000

Fraction By Weight: >99%

ACGIH TLV: 0.1 MG/M3; 9192

Hazards

Effects of Overexposure:MAY CAUSE IRRITATION TO SKIN AND EYES.REPEATED
CONTACT MAY CAUSE ALLERGIC REACTION.

First Aid

First Aid:REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF NEED. SKIN:WASH WITH
SOAP & WATER. EYES:FLUSH WITH WATER 15 MIN. KEEP WARM AND QUIET GET
MEDICAL ATTENTION.

Fire Fighting

Flash Point:280F/138C TOC
Lower Limits:UNK
Upper Limits:UNK
Extinguishing Media:WATER SPRAY,FOAM,CARBON DIOXIDE.
Fire Fighting Procedures:WEAR CHEM PROT. SUIT WITH SCBA. COOL CONTRS
WITH H*20.
Unusual Fire/Explosion Hazard:CONTAINERS MAY RUPTURE IN HEAT OF
FIRE.TOXIC GAS MAY EXCAPE DURING FIRE.

Accidental Release

Spill Release Procedures:SM SPL: TAKE UP WITH SAND, OR OTHER NONCOMB.
ABSORB MATL THEN FLUSH AREA WITH H*20. SM DRY SPL: SHOVEL INTO DRY
CONTRS, THEN FLUSH AREA W/H*20.LG SPLS:DIKE FAR AHEAD OF SPL FOR
LATER DISPOSAL. NO CONT ACT W/SPILLED MATL. STOP LK.ELIM IGN
SOURCES.

Handling

Handling and Storage Precautions:STORE IN COOL,DRY,WELL-VENTED AREA
AWAY FROM COMBUSTIBLES & OXIDIZABLE MATL.USE PROMPTLY AFTER
OPENING.AVOID CONTACT.USE WATER SCRUBBER/FILTER COLLECT
Other Precautions:STORE PRODUCT UNDER NITROGEN BLANKET.MATERIAL WILL
DARKEN AND GENERATE AMMONIA ODOR DURING DETERIATION PROCESS.YELLOW
STAIN PRODUCE ON CONTACT IS DIFFICULT TO WASH WITH SOAP AND WATER.

Exposure Controls

Respiratory Protection:DUST MASK/DUST RESPIR
Ventilation:LOCAL EXHAUST TO ELIMINATE MISTS/FUMES/GASES DUST.
Protective Gloves:RUBBER
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:RUBBER BOOTS,ACID SUIT,NYLON PROTECTIVE
CLOTHING.
Supplemental Safety and Health
MSDS EFFECTIVE:12/6/77

Chemical Properties

HCC:T4
Boiling Pt:B.P. Text:541F/283C
Vapor Pres:<1
Vapor Density:3.7
Spec Gravity:1.139
Solubility in Water:APPRECIABLE
Appearance and Odor:OFF WHITE-TAN FLAKES OR CASTSOLID.
Percent Volatiles by Volume:UNK

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS ACIDS.
Stability Condition to Avoid:DO NOT EXPOSE TO MOISTURE AND AIR.
Hazardous Decomposition Products:CO*2, CO, NH*3 NO*X.

Disposal

Waste Disposal Methods:ELIMINATE IGNITION SOURCES. DESTROY BY LIQUID
INCINERATION. INCINERATION WILL BE EASIER BY MIXING WITH A MORE
FLAMMABLE SOLVENT. HANDLE & DISPOSE IN FULL COMPLIANCE WITH ALL
APPLICABLE INTERNATIONAL,F ED,STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.