BCDWT - CLEAR & FUSE ON 921, FUSE ON 916 GRAY
- MSDS: BCDWT
- Manufacturer: R AND G SLOANE
- Product Name: CLEAR & FUSE ON 921, FUSE ON 916 GRAY
- National Stock Number: 8040-00N000191
Product Identification
Product ID:CLEAR & FUSE ON 921, FUSE ON 916 GRAY
MSDS Date:01/01/1985
FSC:8040
NIIN:00N000191
MSDS Number: BCDWT
Responsible Party
Emergency Phone: 213-875-0160
Cage: 14889
Contractor
Cage: 14889
Ingredients
TETRAHYDROFURAN (SARA III)
CAS: 109-99-9
RTECS: LU5950000
OSHA PEL 200 PPM/250 STEL
ACGIH TLV: 200 PPM/250STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
CYCLOHEXANONE (SARA III)
CAS: 108-94-1
RTECS: GW1050000
OSHA PEL S, 50 PPM
ACGIH TLV: S, 25 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
POLYVINYLCHLORIDE RESIN APPROX 10%
RTECS: KV0350000
Hazards
Effects of Overexposure:NAUSEA, DIZ, HEADACHE. NARCOSIS. EYE & NASAL
PASSAGE IRRIT. SKIN IRRIT, DEFATTING OF TISSUE.
First Aid
First Aid:VAPORS: REMOVE TO FRESH AIR. LIQUID: REMOVE CONTAMINATED
CLOTHING & WASH SKIN W/ PLENTY OF WATER. FLUSH EYES W/PLENTY OF
WATER FOR 15 MIN, CALL MD. IF SWALLOWED, INDUCE VOMITING, CALL MD.
Fire Fighting
Flash Point:10F TOC
Lower Limits:1.8
Upper Limits:11.8
Extinguishing Media:DRY CHEM, CO*2, FOAM - ANSUL "PURPLE K" - NATL
AER-O-FOAM
Fire Fighting Procedures:CONFINED AREA: SELF CONTAINED APPAR; POS
PRESS. HOSE MASK.
Unusual Fire/Explosion Hazard:FIRE HAZARD BECAUSE OF LOW FLASH POINTS,
HIGH VOLATILITY & HEAVY VAPOR
Accidental Release
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES - AVOID
BREATHING VAPORS. KEEP LIQUID OUT OF EYES & AVOID CONTACT W/SKIN.
FLUSH W/LG VOLUME OF WATER.
Handling
Handling and Storage Precautions:USE W/ADEQUATE VENTILATION. KEEP FROM
IGNITION SOURCES. AVOID CONTACT W/ SKIN. STORE BETWEEN 40 & 110F.
Other Precautions:FIRE FIGHTING: AIR LINE MASK CAN ALSO BE USED.
Exposure Controls
Respiratory Protection:USE RESPIRATOR FOR ORGANIC VAPORS IN CONFINED
AREAS.
Ventilation:LOCAL: PROVIDE NORM VENT; MECH: LOW PT - 6 AIR CHANGES/HR
Protective Gloves:RUBBER OR PVA
Eye Protection:CHEMICAL SAFETY GOGGLES
Other Protective Equipment:IMPERVIOUS APRON
Supplemental Safety and Health
PRODUCT CONTAINS PIGMENTS, TITANIUMDIOXIDE & CARBON BLACK, AND INERT
FILLERS. BP AND VP BASED ON THF.
Chemical Properties
Boiling Pt:B.P. Text:151F
Vapor Pres:190
Vapor Density:2.49
Spec Gravity:0.9200
Evaporation Rate & Reference:INIT 8 (BUAC)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR OR GRAY, MEDIUM SYRUPY LIQUID, ETHERAL ODOR
Percent Volatiles by Volume:90.0
Stability
Stability Indicator/Materials to Avoid:YES
INORGANIC NITRATE & HALOGENATED HYDROCARBONS
Stability Condition to Avoid:KEEP AWAY FROM HEAT, SPARKS & OPEN FLAME
Hazardous Decomposition Products:WHEN BURNED PVC CONTRIBUTES CO*2, CO*
HCL AS GAS & SMOKE
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT SPARKS & OPEN
FLAME
Disposal
Waste Disposal Methods:EXCESSIVE QUANTITIES SHOULD NOT BE PERMITTED TO
ENTER DRAINS WHERE THERE IS DANGER OF VAPOR BECOMING IGNITED.
DISPOSE IN ACCORDANCE W/FED, STATE, LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.