BCFGY - MOLYBDATE REAGENT, 21073
- MSDS: BCFGY
- Manufacturer: HACH CO
- Product Name: MOLYBDATE REAGENT, 21073
- National Stock Number: 6810-00N000364
Product Identification
Product ID:MOLYBDATE REAGENT, 21073
MSDS Date:03/16/1990
FSC:6810
NIIN:00N000364
MSDS Number: BCFGY
Responsible Party
LOVELAND, CO 80539-0389
US
Emergency Phone: 303-962-6721
Info Phone: 800-227-4224
Cage: 91224
Contractor
Telephone: 970-669-3050/ 303-623-5716
Cage: 91224
Ingredients
MOLYBDIC ACID, DISODIUM SALT; (SODIUM MOLYBDATE ANHYDROUS)
CAS: 7631-95-0
RTECS: QA5075000
Fraction By Weight: 100%
OSHA PEL 5 MG/M3 (MO)
ACGIH TLV: 5 MG/M3 (MO)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT MAY BE IRRITATING TO EYE,
SKIN & RESPIRATORY TRACT. ACUTE TOXICITY:MODERATELY TOX. TARGET
ORGANS:EYES, SKIN, MUCOUS MEMBRANES, RESPIRATORY TRACT, DIGESTIVE
TRACT. CHRONIC TOXICITY:MAY CAU SE GOUT. TARGET ORGANS:NOT
DETERMINED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:IRRITATION OF EYES, NOSE, THROAT, DIFFICULTY IN
BREATHING, LOSS OF COORDINATION, LOSS OF APPETITE, LISTLESSNESS,
DIARRHEA. MAY AFFECT ENZYME ACTIVITY; MAY CAUSE ANEMIA; MAY INDUCE
COPPER DEFICIENCY.
Medical Cond Aggravated by Exposure:CHRONIC RESPIRATORY CONDITIONS,
BLOOD DISEASE, GOUT MAY BE AGGRAVATED BY EXPOSURE TO MOLYBENUM
COMPOUNDS.
First Aid
First Aid:EYE:IMMEDIATELY FLUSH W/WATER FOR AT LEAST 15 MINUTES. CALL
MD. SKIN:WASH W/SOAP & PLENTY OF WATER. INGEST:GIVE LARGE
QUANTITIES OF WATER. GIVE AT LEAST 1 OUNCE OF VINEGAR IN EQUAL
AMOUNT OF WATER. IN DUCE VOMITING BY STICKING FINGER DOWN THROAT.
NEVER GIVE ANYTHING BY MOUTH TO UNCONSCIOUS PERSON. CALL MD.
INHAL:REMOVE TO FRESH AIR.
Fire Fighting
Extinguishing Media:WATER, DRY CHEMICAL, ALCOHOL FOAM, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:SWEEP UP POWDER. AVOID BREATHING MATERIAL.
DISSOLVE IN WATER. FLUSH DOWN DRAIN W/EXCESS WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID CONTACT W/EYES, SKIN, CLOTHING.
DO NOT BREATHE CHEMICALS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:ADEQUATE VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
PH:7-10 (5%).
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:1125F,607C
Spec Gravity:3.28
pH:SUPDAT
Solubility in Water:SOLUBLE
Appearance and Odor:WHITE SOLID, NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:MOISTURE.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:DISPOSE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.