Product ID:EBONOL C
MSDS Date:01/01/1985
FSC:6850
NIIN:00N000751
MSDS Number: BCGFP

ENTHONE, INC

350 FRONTAGE RD
WEST HAVEN, CT 06516-4147
US

Cage: 02558

ENTHONE-OMI INC.

NEW HAVEN, CT 06508 US

Telephone: 203-934-8611/ FAX 203-799-8179

Cage: 02258

SODIUM HYDROXIDE (SARA III)

CAS: 1310-73-2

RTECS: WB4900000

Fraction By Weight: >60%

OSHA PEL 2 MG/M3

ACGIH TLV: C 2 MG/M3; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

OXIDIZING MATERIAL,NON-TOXIC

Fraction By Weight: <40%

Effects of Overexposure:RAPIDLY DAMAGING TO SKIN & MUCOUS MEMBRANES

First Aid:EXTERNAL:WASH W/ MUCH WATER;REPORT TO MD. INTERNAL:SWALLOW
VINEGAR WATER, EGG WHITES,DRINK MUCH WATER;REPORT TO MD FOR
EYES:FLUSH W/WATER AT LEAST 15 MIN,GET IMMED MEDICAL ATTN.

Extinguishing Media:WATER(COPIOUS AMTS)
Unusual Fire/Explosion Hazard:MOD EXPLO HAZ WHEN SHOCKED,EXPOS TO
HEAT,SPARKS,FLAME.AVOID REDUCING AGENTS, ORGANIC MATTER

Spill Release Procedures:AVOID CONTACT W/SKIN,EYES,OR CLOTHING.IN CASE
OF CONTACT,FLUSH W/ WATER AT LEAST 15 MIN. AVOID BRTHNG DUST WHICH
IS HARMFUL.SHOVEL DRY POWDER UP W/CLEAN,DRY STAINLESS STEEL INTO
STEEL CONTAINERS.AFTER CLEAN UP FLUSH AFFECTED AREA W/WATER

Handling and Storage Precautions:KEEP DRY.STORE AT MAX OF 140F. WEAR
PROTECTIVE CLOTHING
Other Precautions:EXOTHERMIC REACTION W/WATER, ACIDS,ORGANIC
MATEIALS.VIOLENT REACTION W/STRONG ACID, STRONG REDUCING AGENTS
ESPECIALLY PHOSPHORUS & SULFUR BEARING CMPDS.WATER SOLTN MAY REACT
W/AL. ZN.

Respiratory Protection:NIOSH/MSHA APPRVD RESP FOR CAUSTIC MIST
Ventilation:MFR RECM LOC EXHST IF GENERAL AREA VENTILATION IS POOR
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Other Protective Equipment:APRON
Supplemental Safety and Health
SOLUBILITY IN WATER:VERY SOLUBLE

Appearance and Odor:WHITE POWDER W/ODOR OF CHLORINE

Stability Indicator/Materials to Avoid:YES
MOISTURE,REDUCERS,ACIDS,ORGANIC MATERIALS
Stability Condition to Avoid:MAY IGNITE OR EXPLO WHEN SHOCKED OR
EXPOSED TO HEAT, SPARKS
Hazardous Decomposition Products:IN A FIRE-CHLORINE OXIDES,SOME QUITE
IRRIT & TOXIC
Conditions to Avoid Polymerization:FRICTION,HEAT,SHOCK,SPARK,CONTACT
W/ORGANIC MATERIAL

Waste Disposal Methods:MFR RECM TAKE SOLIDS TO CHEMICAL WASTE TREATMENT
FACILITY.DO NOT USE STRONG ACIDS TO NEUTRALIZE,AS STRONG ACID
CONDITIONS MAY LIBERATE TOXIC OXYGEN-CHLORINE CMPDS. CONSULT
ENTHONE OPERATING INSTRUCTIO NS.DISPOSE IAW FED.,STATE&LOCAL CODES

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.