BCHLY - TURCO SURJ
- MSDS: BCHLY
- Manufacturer: TURCO PRODUCTS INC
- Product Name: TURCO SURJ
- National Stock Number: 6850-00N001286
Product Identification
Product ID:TURCO SURJ
MSDS Date:01/01/1985
FSC:6850
NIIN:00N001286
MSDS Number: BCHLY
Responsible Party
CARSON, CA 90749
US
Emergency Phone: 614-387-6200
Info Phone: 714-890-3600
Cage: D9808
Contractor
Telephone: 215-419-7890
Cage: D9808
Ingredients
SODIUM CARBONATE
CAS: 497-19-8
RTECS: VZ4050000
Fraction By Weight: 35%
SODIUM TRIPOLYPHOSPHATE
RTECS: YK4900000
Fraction By Weight: 10%
DODECYL BENZENE SULFONIC ACID,SODIUM SALT
CAS: 25155-30-0
RTECS: DB6825000
Fraction By Weight: 1%
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
SODIUM HYDROXIDE (SARA III)
CAS: 1310-73-2
RTECS: WB4900000
Fraction By Weight: 50 - 55%
OSHA PEL 2 MG/M3
ACGIH TLV: C 2 MG/M3; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
SODIUM NITRITE (SARA III)
CAS: 7632-00-0
RTECS: RA1225000
Fraction By Weight: 0.5%
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
Hazards
Effects of Overexposure:SKIN:IRRIT.EYE:CORNEAL DAMAGE,BLINDNESS.VAPOR:
IRRIT RESP TRACT.INGESTION: TISSUE DAMAGE.
First Aid
First Aid:SKIN:FLUSH WITH WATER,REMOVE & LAUNDERED BEFORE REUSE.EYE:
FLUSH WITH WATER 15 MIN,CALL A PHYSICIAN IMMED.INHALATION:REMOVE TO
FRESH AIR,CALL A MD.INGESTION:GIVE LARGE QUANTITY OF MILK OR
WATER.CALL A MD. DO NOT INDUCE VOMITING.
Fire Fighting
Unusual Fire/Explosion Hazard:CONTACT WITH ALUMINUM OR OTHER REACTIVE
METALS MAY GENERATE HYDROGEN GAS IN EXPLOSIVE AMOUNTS
Accidental Release
Spill Release Procedures:SWEEP UP SPILLAGE AND RETURN TO CONTAINER.SOAK
UP SPILLS OF WATER SOLUTION WITH SWEEPING COMPOUND OR ABSORBENT
MATERIAL AND PLACE IN SEALABLE CONTAINER.
Handling
Handling and Storage Precautions:TRANSPORT & STORE IN CLOSED CONTAINERS
AT TEMPERATURES BELOW 130F/54C,ADD CAUTIOUSLY TO COOL WATER,WITH
AGITATION: HEAT EVOLVED
Other Precautions:HAZARDOUS CARBON MONOXIDE GAS CAN FORM UPON CONTACT
WITH FOOD & BEVERAGE PRODUCTS IN ENCLOSED SPACES.FOLLOW APPROPRIATE
TANK ENTRY PROCEDURES (SEE ANSI Z117.1-1977 OR CURRENT UPDATE
CHANGE)
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:GENERAL MECHANICAL
Protective Gloves:RUBBER
Eye Protection:CHEMICAL GOGGLES.
Supplemental Safety and Health
ADD INGRED: NONIONIC WETTING AGENT,2%;SODIUM GLUCONATE,2%.
Chemical Properties
Vapor Pres:<1
Solubility in Water:APPRECIABLE
Appearance and Odor:TAN GRANULAR MIX
Percent Volatiles by Volume:<1
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS,ALUMINUM,TIN,ZINC
Hazardous Decomposition Products:HEAT,STEAM (HYDROGEN,WHEN IN CONTACT
WITH REACTIVE METALS)
Disposal
Waste Disposal Methods:NEUTRALIZE ALKALINITY AND SEPARATE FLOATABLE
GREASES AND OILS FOR INCINERATION OR DISPOSAL IN LANDFILL.DISCHARGE
NEUTRALIZED WATER LAYER IN ACCORDANCE WITH FEDERAL,STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.