BCHSD - Z-SPAR #2 GLAZING PUTTY
- MSDS: BCHSD
- Manufacturer: KOPPERS COMPANY INC
- Product Name: Z-SPAR #2 GLAZING PUTTY
- National Stock Number: 8030-00N001394
Product Identification
Product ID:Z-SPAR #2 GLAZING PUTTY
MSDS Date:01/01/1985
FSC:8030
NIIN:00N001394
MSDS Number: BCHSD
Responsible Party
Emergency Phone: 413-227-2000
Cage: EO454
Contractor
Cage: EO454
Ingredients
ALKYD VEHICLE
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
OSHA PEL 100 PPM
LEAD DRIER (OSHA PEL FROM 29CFR 1910.1025)
OSHA PEL 0.05 MG/M3 (PB)
ACGIH TLV: 0.15 MG/M3 (PB);8990
Hazards
Effects of Overexposure:VAPORS: IRRIT TO EYES,NOSE
THROAT,DROWSINESS,DIZZY,COMA. SKIN/EYE: IRRITATION.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR,GIVE ARTIF RESP IF
NEEDED,CALL A MD. EYE CONT: FLUSH WITH WATER 15 MIN,CALL A
PHYSICIAN. SKIN: WASH WITH SOAP & WATER,REMOVE & WASH CONTAMINATED
CLOTHING BEFORE REUSE. INGESTION: DO NOT INDUCE VOMITING,CALL A
PHYSICIAN
Fire Fighting
Flash Point:115F/46C (TOC)
Extinguishing Media:WATER FOG,FOAM,DRY CHEMICAL,CO*2
Fire Fighting Procedures:SELF-CONT BREATH APP,WATER SPRAY TO COOL
EXPOSED CONTAINERS.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS,VENT AREA. CONTAIN & SCOOP UP SPILL WITH
NON-SPARKING TOOLS,RAGS,ETC. USE INERT ABSORBENT MATERIALS ON SMALL
SPILLS OR ON RESIDUALS OF LARGE SPIL LS.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED & UPRIGHT TO
PREVENT LEAKAGE. AVOID EYE/SKIN CONTACT & BREATHING OF VAPOR OR
SPRAY MIST.
Other Precautions:DO NOT USE IN CONFINED AREAS,TANK OR PIT WITHOUT
ADEQUATE VENTILATION.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:LOCAL/MECHANICAL EXHAUST
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Supplemental Safety and Health
Chemical Properties
Vapor Density:>1
Evaporation Rate & Reference:<1 (N-BUT ACE)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SEMI-PASTE,TYPICAL PAINT ODOR
Percent Volatiles by Volume:39
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL,STATE &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.