Product ID:DITZLER BODY FILLER,DX999
MSDS Date:01/01/1985
FSC:8030
NIIN:00N006074
MSDS Number: BCLWW

PPG INDUSTRIES

ONE GATEWAY CENTER
PITTSBURGH, PA 15222-1416
US

Emergency Phone: 304-843-1300

Info Phone: 412-434-3131

Cage: PPGIN

PPG INDUSTRIES INC CHEMICAL DIVISION

PITTSBURGH, PA 15222-1416 US

Telephone: 304-843-1300

Cage: 93915

STYRENE, MONOMER (SARA III)

CAS: 100-42-5

RTECS: WL3675000

Fraction By Weight: 10%

OSHA PEL 100 PPM

ACGIH TLV: S,50PPM/100STEL;9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: <.06%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Effects of Overexposure:EYE/SKIN: IRRIT. VAPORS: ANESTHETIC,IRRIT OF
RESP TRACT,ACUTE NERVOUS SYSTEM DEPRESSION,COMA.

First Aid:EYE: FLUSH WITH WATER 15 MINUTES,GET MEDICAL TREATMENT. SKIN:
WASH WITH WATER,REMOVE CONTAMINATED CLOTHING,CONULT PHYSICIAN.
INHALATION: REMOVE FROM EXPOSURE,RESTORE BREATHING,CONSULT
PHYSICIAN.

Flash Point:96F/35C (ASTM)
Lower Limits:1.1
Extinguishing Media:CARBON DIOXIDE,DRY CHEMICAL,FOAM
Fire Fighting Procedures:SELF-CONT BREATH APP,WATER FOG TO COOL EXPOSED
CONTAINERS
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.

Spill Release Procedures:SECURE SOURCES OF IGNITION. AVOID BREATHING
VAPORS,VENTILATE AREA. REMOVE WITH INERT ABSORBENT AND NON-SPARKING
TOOLS.

Handling and Storage Precautions:DO NOT STORE ABOVE 80F/26C. DO NOT
TAKE INTERNALLY. GROUND CONTAINER WHEN POURING,AVOID FREE FALL IN
EXCESS OF A FEW INCHES.
Other Precautions:READ LABEL BEFORE USE.

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:LOCAL/MECHANICAL TO MAINTAIN BELOW TLV
Protective Gloves:REQUIRED
Eye Protection:SPLASH GOGGLES
Other Protective Equipment:AS NEEDED TO PREVENT SKIN CONTACT.
Supplemental Safety and Health

Boiling Pt:B.P. Text:295F/146C
Vapor Density:>1
Evaporation Rate & Reference:<1 (ETHER)
Percent Volatiles by Volume:22

Stability Indicator/Materials to Avoid:NO
PEROXIDES,FREE RADICAL INITATORS,STRONG ALKALIS.
Stability Condition to Avoid:PROLONG STORAGE ABOVE 80F/26C.
Hazardous Decomposition Products:CARBON MONOXIDE,ALDEHYDES,ORGANIC
ACIDS,HEAVY SMOKE.
Conditions to Avoid Polymerization:ELEVATED TEMP,CONTACT WITH
PEROXIDES,ALKALIS,INITIATORS,ETC.

Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.