BCMQF - ENTACIDE

  • MSDS: BCMQF
  • Manufacturer: AIRWICK INDUSTRIES INC
  • Product Name: ENTACIDE
  • National Stock Number: 6840-00N006378
Product Identification

Product ID:ENTACIDE
MSDS Date:01/01/1985
FSC:6840
NIIN:00N006378
MSDS Number: BCMQF

Responsible Party
AIRWICK INDUSTRIES,INC.
370 WABASHA STREET
ST. PAUL, MN 55102
US

Emergency Phone: 800-328-0026

Info Phone: 612-451-4115

Cage: 1N263

Contractor
AIRWICK INDUSTRIES INC. AIRKEM COLUMBUS
COLUMBUS, OH 43220-3701 US

Telephone: 614-451-4916

Cage: 1N263

Ingredients

ISOBUTANE/PROPANE (CAS NO 75-28-5/74-98-6)

Fraction By Weight: 30%


PYRETHRUM (SARA III)

CAS: 8003-34-7

RTECS: UR4200000

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

Effects of Overexposure:EYE/SKIN: POSSIBLE IRRIT

First Aid

First Aid:EYE: FLUSH WITH WATER 15 MIN. SKIN: WASH WITH SOAP & WATER.
INGESTION: GIVE WATER,DO NOT INDUCE VOMITING.

Fire Fighting

Flash Point:200F/93C (TOC)
Extinguishing Media:WATER
Fire Fighting Procedures:SELF-CONTAIN BREATH APP
Unusual Fire/Explosion Hazard:AEROSOL CANS MAY EXPLODE WHEN EXPOSED TO
HIGH TEMPERATURES.

Accidental Release

Spill Release Procedures:PICK UP EXCESS WITH ABSORBENT-TYPE MATERIAL

Handling

Handling and Storage Precautions:FOOD SHOULD BE REMOVED OR COVERED
DURING TREATMENT,FOOD PROCESSING SHOULD BE COVERED DURING TREATMENT
OR TOROUGHLY CLEANED AFTER. EPA REG # 42964-3
Other Precautions:KEEP OUT OF REACH OF CHILDREN. EXPOSURE TO
TEMPERATURES ABOVE 130F/54C MAY CAUSE BURSTING. DO NOT PUNCTURE
CAN,CONTENTS UNDER PRESSURE.

Exposure Controls

Respiratory Protection:NONE (MFR)
Ventilation:LOCAL/MECHANICAL
Protective Gloves:NONE
Eye Protection:NONE
Other Protective Equipment:NONE
Supplemental Safety and Health

Chemical Properties

Spec Gravity:0.79
Appearance and Odor:AEROSOL WITH NON-DESCRIPT ODOR

Stability

Stability Indicator/Materials to Avoid:YES
NONE (MFR)
Hazardous Decomposition Products:NONE (MFR)

Disposal

Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.