BCMTC - SPEED-E-NAMEL

  • MSDS: BCMTC
  • Manufacturer: ZYNOLYTE PRODUCTS CO
  • Product Name: SPEED-E-NAMEL
  • National Stock Number: 8010-00N006431
Product Identification

Product ID:SPEED-E-NAMEL
MSDS Date:01/01/1985
FSC:8010
NIIN:00N006431
MSDS Number: BCMTC

Responsible Party
ZYNOLYTE PRODUCTS CO

Emergency Phone: 213-604-1333

Cage: 25461

Contractor
ZYNOLYTE PRODUCTS CO
6244 CARSON, CA 90749 US

Telephone: 310-513-0700

Cage: 25461

Ingredients

METHYLENE CHLORIDE (SARA III)

CAS: 75-09-2

RTECS: PA8050000

Fraction By Weight: 42%

OSHA PEL 500 PPM/C,1000; Z2

ACGIH TLV: 50 PPM, A2; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ALIPHATIC HYDROCARBON

Fraction By Weight: 9%

ACGIH TLV: 150 PPM (MFR)


AROMATIC HYDROCARBON SOLVENT

Fraction By Weight: 2%

ACGIH TLV: 200 PPM (MFR)


ISOBUTANE PROPANE PROPELLENT

Fraction By Weight: 33.5%

Hazards

Effects of Overexposure:EYE: IRRITATION. VAPORS: ANESTHETIC

First Aid

First Aid:EYE: FLUSH WITH WATER 15 MINUTES,TAKE TO PHYSICIAN.
INHALATION: REMOVE FROM EXPOSURE,GIVE ARTIF RESP IF NEEDED,CALL
PHYSICIAN.

Fire Fighting

Flash Point:FLAME EXTEN: 28"
Extinguishing Media:FOAM,CARBON DIOXIDE,DRY CHEMICAL
Fire Fighting Procedures:SELF-CONTAIN BREATH APP,WATER FOG TO COOL
EXPOSED CONTAINERS
Unusual Fire/Explosion Hazard:PRESSURIZED PRODUCT,EXPOSURE TO HIGH HEAT
MAY CAUSE BURSTING.

Accidental Release

Spill Release Procedures:N/A (MFR)

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F/48C

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:LOCAL/MECHANICAL
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health

Chemical Properties

Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:86.5

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:TEMP ABOVE 120F/48C

Disposal

Waste Disposal Methods:COMPLY WITH LOCAL, STATE AND FEDERAL
REGULATIONS. DO NOT INCINERATE OR PUNCTURE CANS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.