Product ID:UNI-SOLV
MSDS Date:01/01/1987
FSC:6850
NIIN:00N006989
MSDS Number: BCPCF

UNI-LAB CORPORATION

Emergency Phone: 1-800-424-9300

Cage: OO312

UNI-LAB CORPORATION

Telephone: 1-800-528-4826

Cage: OO312

ALIPHATIC HYDROCARBONS

Fraction By Weight: 60%

ACGIH TLV: 150 PPM (MFR)

CHLORINATED HYDROCARBONS

Fraction By Weight: 25%

ACGIH TLV: 350 PPM (MFR)

CHLORINATED HYDROCARBONS

Fraction By Weight: 5%

ACGIH TLV: 200 PPM (MFR)

Effects of Overexposure:DIZZINESS,BLURRED VISION,DISORIENTATION.

First Aid:REMOVE VICTIM TO FRESH AIR. IF LARGE AMOUNTS ARE
INHALED,ADMINISTER ARTIFICIAL RESPIRATION OR OXYGEN. FOR EYE
CONTACT,FLUSH EYES W/PLENTY OF H*2O FOR AT LEAST 15 MINUTES.

Flash Point:135F,57.2C (TCC)
Extinguishing Media:FOAM
Fire Fighting Procedures:WEAR PRESSURE DEMAND SCBA & FULL PROTECTIVE
CLOTHING.
Unusual Fire/Explosion Hazard:THERMAL DECOMPOSITION PRODUCTS MAY
INCLUDE HCL & PHOSGENE

Spill Release Procedures:VENTILATE CONTAMINATED AREA & ALLOW NORMAL
EVAPORATION OR SOAK UP EXCESS & PUT WASTE INTO CLOSED DRUM.

Handling and Storage Precautions:STORE IN COOL,DRY AREAS. AVOID
PROLONGED OR EXCESSIVE SKIN CONTACT. DO NOT TAKE INTERNALLY.
Other Precautions:NO SMOKING IN AREA OF USE. DO NOT USE IN GENERAL
VICINITY OF ARC WELDING,OPEN FLAMES,OR HOT SURFACES. HEAT &/OR UV
RADIATION MAY CAUSE THE FORMATION OF HCL &/OR PHOSGENE.

Respiratory Protection:NOT USUALLY REQUIRED
Ventilation:LOCAL EXHAUST SATISFACTORY
Protective Gloves:NEOPRENE
Eye Protection:MANDATORY
Other Protective Equipment:RUBBER OR NEOPRENE APRON
Supplemental Safety and Health
EMERGENCY PHONE #: GIVEN FOR CHEMTREC. BOILING PT: INITIAL.

Boiling Pt:B.P. Text:104F,40C
Spec Gravity:0.8609
Evaporation Rate & Reference:5.5 (BU AC)
Solubility in Water:NOT SOLUBLE
Appearance and Odor:WATER CLEAR W/CHLORINATED ODOR
Percent Volatiles by Volume:100

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EXCESS HEAT OR STORAGE OVER 120F (48.9C)
Hazardous Decomposition Products:PHOSGENE,HYDROGEN CHLORIDE,CARBON
DIOXIDE,CARBON MONOXIDE

Waste Disposal Methods:LAND FILL. WASTE DISPOSAL MUST BE IAW
FEDERAL,STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.