Product ID:PLASTMO PVC GUTTER CEMENT
MSDS Date:05/01/1985
FSC:8040
NIIN:00N009581
MSDS Number: BCSTS

INDUSTRIAL POLYCHEMICAL SERVICE

17109 SOUTH MAIN STREET
GARDENA, CA 90248

Emergency Phone: 213-321-6515

Info Phone: 213-321-6515

Cage: 17510

IPS CORPORATION

379 GARDENA, CA 90248 US

Telephone: 310-898-3300

Cage: 17510

POLYVINYL CHLORIDE RESIN W/INERT FILLERS

CAS: 9002-86-2

RTECS: KV0350000

Fraction By Weight: Fraction by Wt

OSHA PEL N/K

ACGIH TLV: N/K

TETRAHYDROFURAN (SARA III)

CAS: 109-99-9

RTECS: LU5950000

Fraction By Weight: MAJOR

OSHA PEL 200 PPM/250 STEL

ACGIH TLV: 200 PPM/250STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

CYCLOHEXANONE (SARA III)

CAS: 108-94-1

RTECS: GW1050000

Fraction By Weight: MINOR

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:(SEE SIGNS & SYMPTOMS OF OVEREXPOSURE)
Explanation of Carcinogenicity:NO INGREDIENTS ARE LISTED CARCINOGENS
(MFR).
Effects of Overexposure:SEVERE OVEREXPOSURE MAY RESULT IN NAUSEA,
DIZZINESS, HEADACHE. CAN CAUSE NARCOSIS, IRRITATION OF EYES & NASAL
PASSAGES. MAY IRRITATE SKIN. NORMAL DEFATTING EFFECT OF SOLVENTS ON
TISSUE.
Medical Cond Aggravated by Exposure:N/K .

First Aid:INHAL:IF OVERCOME BY VAPORS,REMOVE TO FRESH AIR & IF
BREATHING STOPPED,GIVE ARTIFICIAL RESPIRATION-PREFERABLY
MOUTH-TO-MOUTH.IF BREATHING DIFFICULT,GIVE O*2.CALL MD. EYE & SKIN
CONTACT:REMOVE CONTAMIN ATED CLTHG & SHOES.WASH SKIN W/PLENTY OF
H*2O FOR AT LEAST 15 MIN.FLUSH EYES W/PLENTY OF H*2O FOR 15 MIN &
CALL PHYSICIAN. INGESTION:IF SWALLOWED, DO NOT INDUCE VOMITING.
CALL PHYSICIAN IMMEDIATELY.

Flash Point Method:TCC
Flash Point:6-8F (-14--13C)
Lower Limits:1.8
Upper Limits:11.8
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, FOAM -ANSUAL "PURPLE
K"-NATIONAL AER-O-FOAM, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APVD SCBA & FULL PROT
EQPT.EVACUATE CLOSED AREAS.STAY UPWIND.CLOSE/CONFINED QUARTERS REQ
SCBA;POS PRESS HOSE MASKS/AIRLINE MASK.(SUPP DATA)
Unusual Fire/Explosion Hazard:FIRE HAZARD BECAUSE OF LOW FLASH POINT &
HIGH VOLATILITY. VAPORS ARE HEAVIER THAN AIR & MAY TRAVEL TO SOURCE
OF IGNITION.

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES.AVOID BREATHING
OF VAPORS.KEEP LIQUID OUT OF EYES.FLUSH W/LGE VOLUME OF
H*2O.CONTAIN LIQUID W/SAND OR EARTH,ABSORB W/SAND OR NONFLAMM
ABSORB MATL & TRANSFER INTO STEEL D RUMS FOR RCVY/DISPOSAL.PVNT LIQ
FROM ENTER DRAINS.
Neutralizing Agent:N/K

Handling and Storage Precautions:STORE IN SHADE BETWEEN 40F(4C) &
110F(43C).KEEP AWAY FROM HEAT,SPARKS,OPEN FLAME&OTHER SCE OF
IGN.AVOID PROLONG BRTHING OF VAPOR.USE W/ADEQUATE VENT.
Other Precautions:FOLLOW ALL PRECAUTIONARY INFORMATION GIVE ON THE
CONTAINER LABEL, PRODUCT BULLETINS & OUR SOLVENT CEMENTING
LITERATURE. ALL HANDLING EQUIPMENT SHOULD BE ELECTRICALLY GROUNDED.

Respiratory Protection:NONE REQUIRED WITH ADEQUATE VENTILATION. USE
NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC VAPORS FOR CONFINED
AREAS
Ventilation:PROVIDE ADEQUATE VENTILATION. VAPOR CONCENTRATION MUST BE
KEPT WELL BELOW TLV.
Protective Gloves:RUBBER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:IMPERVIOUS APRON(IF NEEDED).
Work Hygienic Practices:N/K
Supplemental Safety and Health
BOILING POINT & VAPOR PRESSURE:BASED ON FIRST BOILING
COMPONENT:TETRAHYDROFURAN. SOLUBILITY IN H*2O:SOLVENT PORTION
COMPLETELY SOLUBLE IN H*2O.PVC RESIN PORTION SEPARATES OUT.
PH,ROUTES OF ENTRY & CAR CINOGENITY:FP N. FIRE FIGHT PROCEDURE:USE
H*2O TO COOL CNTNR,TO FLUSH SPILL FROM SOURCE OF IGNITION & TO
DISPERSE VAPOR

Boiling Pt:B.P. Text:151F (66C)
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:143
Vapor Density:2.49
Spec Gravity:1.005 +/- 0.005
Evaporation Rate & Reference:APPROX 8 (BUTYL ACETATE)
Solubility in Water:(SEE SUPP DATA)
Appearance and Odor:CLEAR, HEAVY SYRUPY LIQUID, ETHEREAL ODOR
Percent Volatiles by Volume:85
Corrosion Rate:

Stability Indicator/Materials to Avoid:YES
CAUSTICS, AMMONIA, INORGANIC ACIDS, CHLORINATED COMPOUNDS, STRONG
OXIDIZERS & ISOCYNATES.
Stability Condition to Avoid:KEEP AWAY FROM HEAT, SPARKS, OPEN FLAME &
OTHER SOURCE OF IGNITION. THIS LIQUID IS VERY STABLE AT NORMAL
AMBIENT TEMP.
Hazardous Decomposition Products:WHEN FORCED TO BURN, PVC GIVE OUT
CARBON MONOXIDE, CARBON DIOXIDE, HYDROGEN CHLORIDE AND SMOKE.
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT, SPARKS, OPEN
FLAME AND OTHER SOURCES OF IGNITION.

Waste Disposal Methods:FOLLOW LOCAL,STATE & FEDERAL REGULATIONS.CONSULT
DISPOSAL EXPERT. CAN BE DISPOSED OF BY INCINERATION. EXCESSIVE
QUANTITIES SHOULD NOT BE PERMITTED TO ENTER DRAINS. WASTE CODE:412.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.