BCWJV - GREEN EXT. PAINT, TT-P-102E C-24300
- MSDS: BCWJV
- Manufacturer: EVERSEAL MANUFACTURING CO INC
- Product Name: GREEN EXT. PAINT, TT-P-102E C-24300
- National Stock Number: 8010-00-055-5167
Product Identification
Product ID:GREEN EXT. PAINT, TT-P-102E C-24300
MSDS Date:03/09/1987
FSC:8010
NIIN:00-055-5167
MSDS Number: BCWJV
Responsible Party
RIDGEFIELD, NJ 07657
US
Emergency Phone: 201-943-4986
Cage: EO432
Contractor
Telephone: 201-943-4986
Cage: 72988
Ingredients
RESIN
CAS: 64741-67-9
RTECS: VG7067000
Fraction By Weight: 33%
OSHA PEL NA
ACGIH TLV: NA
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 10 - 15%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
ZINC OXIDE
CAS: 1314-13-2
RTECS: ZH4810000
Fraction By Weight: 11%
OSHA PEL 15MG/M3 TDUST/5 FUME
ACGIH TLV: 10MG/M3 TDUST; 9293
CALCIUM CARBONATE (MARBLE) (LIMESTONE)
CAS: 1317-65-3
RTECS: EV9580000
Fraction By Weight: 26%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9192
CHROMIUM (III) OXIDE
CAS: 1308-38-9
RTECS: GB6475000
Fraction By Weight: 2%
OSHA PEL 0.5 MG/M3 (CR)
ACGIH TLV: 0.5 MG/M3 (CR); 8990
MINERAL SPIRITS (VAPOR PRESSURE 5, TOXICITY DATA 5G/KG
CAS: 64475-85-0
RTECS: PY8240000
Fraction By Weight: 16%
OSHA PEL 120PPM
ACGIH TLV: NA
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:SEE OVEREXPOSURE
Effects of Overexposure:DRYING OF SKIN, EYE IRRITATION, EXCESSIVE
INHALATION MAY CAUSE ANESTHESIA, HEADACHE, DIZZINESS, NAUSEA, UPPER
RESPIRATORY IRRITATION.
Medical Cond Aggravated by Exposure:SEE ABOVE SIGNS AND SYMPTOMS OF
OVEREXPOSURE.
First Aid
First Aid:INHALATION:CALL A PHYSICIAN. SKIN CONTACT:WASH WITH MILD SOAP
& WATER, APPLY A MILD CREAM, IN SEVERE CASES CONTACT A PHYSICIAN.
INGESTION:CALL A PHYSICIAN.
Fire Fighting
Flash Point:105F/41C
Lower Limits:1
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Unusual Fire/Explosion Hazard:WATER NOT A SUITABLE EXTINGUISHING
MEDIUM. FIREFIGHTERS SHOULD WEAR SELF-CONTAINED BREATHING
APPARATUS.
Accidental Release
Spill Release Procedures:FLUSH WITH WATER INTO RETAINING AREA OR
CONTAINER. AVOID SPARKS, FIRE OR HOT METAL SURFACES. SMALL
QUANTITIES MAY BE ABSORBED ONTO AN APPROPRIATE ABSORBANT.
Handling
Handling and Storage Precautions:KEEP COOL, AWAY FROM SOURCE OF
IGNITION, ADEQUATE VENTILATION. AVOID PROLONGED AND REPEATED
PERSONAL CONTACT.
Other Precautions:NPCA/HMIS RATING 3, 2, 0, H
Exposure Controls
Respiratory Protection:DEPENDS ON CONCENTRATION ABOVE TIME WEIGHED
TLV-CARTRIDGE RESPIRATOR MASK.
Ventilation:WHATEVER IS SUFFICIENT TO KEEP WORKING ROOM CONCENTRATION.
MECHANICAL: BELOW THE TLV.
Protective Gloves:IMPERMEABLE
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:APRON, BARRIER CREAM
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:323-390F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:GREEN
Percent Volatiles by Volume:30
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, OPEN FIRE
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
MONOXIDE & CARBON DIOXIDE
Disposal
Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS OR DISPOSE OF
IN ACCORDANCE WITH APPLICABLE LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.