BCXXW - METAL PRETREATMENT,RESIN-ACID,MIL-C-8514C

  • MSDS: BCXXW
  • Manufacturer: SEAGRAVE COATINGS CORP OF VA
  • Product Name: METAL PRETREATMENT,RESIN-ACID,MIL-C-8514C
  • National Stock Number: 8030-00-082-2425
Product Identification

Product ID:METAL PRETREATMENT,RESIN-ACID,MIL-C-8514C
MSDS Date:01/01/1985
FSC:8030
NIIN:00-082-2425
MSDS Number: BCXXW

Responsible Party
SEAGRAVE COATINGS CORP OF VA
4030 SEAGUARD AVENUE
PORTSMOUTH, VA 23701
US

Emergency Phone: 804-488-4411/800-424-9300 CHERMTREC

Info Phone: 804-488-4411

Cage: 60163

Contractor
SHERWIN-WILLIAMS, SEAGUARD
PORTSMOUTH, VA 23704 US

Telephone: 757-397-2223

Cage: 60163

Ingredients

ZINC CHROMATE

CAS: 13530-65-9

RTECS: GB3290000

Fraction By Weight: 7%

OSHA PEL 0.1 MG/M3 (CRO3)

ACGIH TLV: 0.01MG/M3(CR)A1;9192


N-BUTYL ALCOHOL (SARA III)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 16%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ETHYL ALCOHOL (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 62%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192


PHOSPHORIC ACID (SARA III)

CAS: 7664-38-2

RTECS: TB6300000

Fraction By Weight: 3.6%

OSHA PEL 1 MG/M3/3 STEL

ACGIH TLV: 1 MG/M3/3 STEL; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Effects of Overexposure:IRRITATING TO EYES,SKIN AND RESPIRATORY TRACT

First Aid

First Aid:EYE CONT:FLUSH WITH WATER 15 MIN CONTACT PHYSICIAN. SKIN
CONT: FLUSH FREELY WITH WATER.INHALATION:REMOVE TO FRESH AIR,CALL A
PHYSICIAN IF NEEDED

Fire Fighting

Flash Point:55F/12C (TOC)
Lower Limits:1.4
Upper Limits:19
Extinguishing Media:DRY CHEMICAL,CARBON DIOXIDE,WATER SPRAY
Fire Fighting Procedures:ALCOHOL FOAM IS INEFFECTIVE
Unusual Fire/Explosion Hazard:DANGEROUS WHEN EXPOSED TO EXTREME HEAT
AND FLAMES

Accidental Release

Spill Release Procedures:FOLLOW GENERAL CLEANING PROCEDURES. SMALL
SPILLS MAY BE PICKED UP WITH ABSORBENT MATERIAL AND PUT IN SUITABLE
CONTAINER

Handling

Handling and Storage Precautions:MATERIAL IS SHIPPED AS 4 GALLON OF
RESIN COMPONENT AND 1 GALLON ACID COMPONENT IN A 5 GALLON PAIL. THE
2 COMPONENTS MUST BE MIXED & 30 MIN INDUCT TIME
Other Precautions:STORE IN COOL DRY PLACE AWAY FROM OPEN FLAMES AND
PHYSICAL ABUSE.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORDANCE
WITH EXPOS OF CONCERN
Ventilation:LOCAL/MECHANICAL
Protective Gloves:RECOMMENDED
Eye Protection:CHEMICAL GOGGLES
Supplemental Safety and Health

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:165F/73C
Vapor Pres:40
Vapor Density:2.55
Spec Gravity:<0.92
Evaporation Rate & Reference:-1 (N-BUAC)
Solubility in Water:MODERATE
Appearance and Odor:YELLOW LIQUID,ALCOHOL-LIKE ODOR
Percent Volatiles by Volume:90

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:OPEN FLAMES,UNGROUNDED EQUIPMENT

Disposal

Waste Disposal Methods:RETURN UNUSED,UNMIXED MATERIALS TO SUITABLE
CONTAINER.DISPOSE OF IN ACCORDANCE WITH APPLICABLE LOCAL,STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.