BCYQG - XC RAPID CLEAN-CODE 40,PT A(SEE ADDL DATA)
- MSDS: BCYQG
- Manufacturer: TRUFLEX RUBBER PRODUCTS CO
- Product Name: XC RAPID CLEAN-CODE 40,PT A(SEE ADDL DATA)
- National Stock Number: 2640-00-102-0978
Product Identification
Product ID:XC RAPID CLEAN-CODE 40,PT A(SEE ADDL DATA)
MSDS Date:11/22/1985
FSC:2640
NIIN:00-102-0978
Kit Part:Y
MSDS Number: BCYQG
Responsible Party
LOS ANGELES, CA 90051
US
Emergency Phone: 213-224-6300
Info Phone: 213-224-6300
Cage: 28954
Contractor
Telephone: 213-224-6300
Cage: 28954
Ingredients
METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)
CAS: 71-55-6
RTECS: KJ2975000
Fraction By Weight: 93.5%
OSHA PEL 350 PPM/450 STEL
ACGIH TLV: 350 PPM/450STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
UNIDENTIFIED COMPONENTS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE HAZARDS-EYE CONTACT:IRRITATION.
SKIN:IRRITATION,DERMATITIS. INHALATION:IRRITATION,CENTRAL NERVOUS
SYSTEM EFFECTS,UNCONSCIOUSNESS,EVEN DEATH. INGESTION:LOW ACUTE
TOXICITY. CHRONIC HAZARDS:LIVER A ND KIDNEY DAMAGE.
Explanation of Carcinogenicity:MANUFACTURER STATES NO CARCINOGENIC
INGREDIENTS.
Effects of Overexposure:EYES:PAIN,IRRITATION. SKIN:IRRITATION.
INHALATION:IRRITATION,DIZZINESS,NAUSEA,LIGHTHEADEDNESS,HEADACHE,LOS
S OF EQUILIBRIUM,UNCONSCIOUSNESS,EVEN DEATH. INGESTION:LOW ACUTE
TOXICITY.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:FIRST AID-EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES.
SKIN:WASH WITH SOAP AND WATER WHILE REMOVING CONTAMINATED CLOTHING.
INHALATION:REMOVE TO FRESH AIR.GIVE OXYGEN/CPR IF NEEDED.SEE
DOCTOR. INGEST ION:DO NOT INDUCE VOMITING,IF CONSCIOUS,DRINK LARGE
QUANTITIES OF WATER.SEE DOCTOR.
Fire Fighting
Flash Point:NONE
Lower Limits:7.5
Upper Limits:15
Extinguishing Media:WATER FOG
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY. CONTAIN RUNOFF.
Unusual Fire/Explosion Hazard:CONCENTRATED VAPORS CAN BE IGNITED WITH A
HIGH ENERGY SPARK, FLAME OR OTHER IGNITION SOURCE.BURNING CAN
PRODUCE HYDROGEN CHLORIDE OR POSSIBLE TRACES OF PHOSGENE
Accidental Release
Spill Release Procedures:USE APPROPIATE PROTECTIVE CLOTHING AND
EQUIPMENT. ABSORB IN INERT MATERIAL, AND PLACE IN APPROPIATE
DISPOSAL CONTAINER AND SEAL. FLUSH AREA WITH SOAP AND WATER.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. KEEP AWAY
FROM FLAMES AND IGNITION SOURCES. ALUMINUM IS NOT ACCEPTABLE
MATERIAL FOR TANKS, FITTINGS, ETC.
Other Precautions:VAPORS ARE HEAVIER THAN AIR, AND WILL COLLECT IN LOW
AREAS. USE SPECIAL BREATHING APPARATUS AND HAVE OBSRVER PRESENT IF
ENTERING SUCH AREAS.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA-APPROVED ORGANIC VAPOR RESPIRATOR
FOR EMERGENCIES.
Ventilation:LOCAL EXHAUST PREFERRED,MECHANICAL EXHAUST ACEPTABLE.
Protective Gloves:NEOPRENE OR VITON.
Eye Protection:CHEMICAL SPLASH GOGGLES.
Other Protective Equipment:PROTECTIVE CLOTHING AS REQUIRED TO PREVENT
PROLONGED/REPEATED CONTACT. EYE WASH STATION AND SAFETY SHOWER.
Work Hygienic Practices:WASH THOROUGHLY AFTER USING. LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
KEY1:T4. THIS NSN CONSISTS OF 3 PARTS: PATCHES,BUFFING FLUID AND
VULCANIZING FLUID. THIS PART A IS FOR BUFFING FLUID. FOR
VULCANIZING FLUID, SEE PNI B, SAME NSN. ANAESTHETIC EFFECTS MAY BE
SEEN IN THE RANGE OF 500-1000 PPM. OVER 1000 PPM MAY CAUSE
DIZZINESS. OVER 10000 PPM CAN CAUSE UNCONSCIOUSNESS OR DEATH.
Chemical Properties
HCC:T4
Boiling Pt:B.P. Text:165F/74C
Melt/Freeze Pt:M.P/F.P Text:-49F,-45C
Vapor Pres:100
Vapor Density:4.55
Spec Gravity:1.320
Evaporation Rate & Reference:0.35(ETHER,ETHYL=1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR LIQUID WITH ETHER-LIKE ODOR
Stability
Stability Indicator/Materials to Avoid:YES
CONTAMINATION WITH CAUSTIC SODA, CAUSTIC POTASH, OR OXIDIZING MATERIALS
MAY FORM SHOCK SENSITIVE EXPLOSIVES.
Stability Condition to Avoid:OPEN FLAMES, HOT GLOWING SURFACES OR
ELECTRIC ARCS.
Hazardous Decomposition Products:MAY EMIT HCL AND/OR PHOSGENE GAS WHEN
INVOLVED IN BURNING
Disposal
Waste Disposal Methods:CONTACT YOUR LOCAL ENVIRONMENTAL OFFICER.
MANUFACTURER RECOMENDS DISPOSAL IN A PERMITTED HAZARDOUS WASTE
MANAGEMENT FACILITY. COMPLY WITH ALL APPLICABLE FEDERAL, STATE AND
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.