BCZFJ - GA6-004

Product Identification

Product ID:GA6-004
MSDS Date:01/01/1985
FSC:8010
NIIN:00-111-8003
MSDS Number: BCZFJ

Responsible Party
ENTERPRISE CHEMICAL COATINGS CO.

Emergency Phone: 312-376-9150

Cage: 60035

Contractor
ENTERPRISE CHEMICAL COATING CO DIV OF INSILCO CORP
CHICAGO, IL 60608-5322 US

Cage: 60035

Ingredients

36% LEAD DRIER

Fraction By Weight: <0.5%


NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 40%

OSHA PEL 100 PPM


DIACETONE ALCOHOL (4-HYDROXY-4-METHYL-2-PENTANONE)

CAS: 123-42-2

RTECS: SA9100000

Fraction By Weight: <0.5%

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM; 9192

Hazards

Effects of Overexposure:HEADACHE,NAUSEA,SKIN AND EYE IRRITATION.LEAD
POISONING SYMPTOMS.

First Aid

First Aid:INHAL:REMOVE FROM EXPOSURE,RESTORE BREATHING.NOTIFY A DR.
EYES:FLUSH IMMEDIATELY WITH WATER. TAKE TO DR. FOR TREATMENT.
SKIN:WASH WITH SOAP AND WATER.

Fire Fighting

Flash Point:40/104 TCC
Lower Limits:0.7
Upper Limits:6.5
Extinguishing Media:ANY CLASS B FIRE EXTINGUISHER
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT,ELECTRICAL
EQUIPMENT,SPARKS AND OPEN FLAME.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
VAPORS.VENTILATE AREA. CONTAIN AND REMOVE WITH INERT ABSORBENT AND
NON-SPARKING TOOLS.

Handling

Handling and Storage Precautions:STORE LARGE AMTS IN BUILDINGS DESIGNED
AND PROTECTED FOR STORAGE COMPLIANCE WITH OSHA 1910.106.

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED
Ventilation:LOCAL EXHAUST TO KEEP BELOW TLV
Protective Gloves:NOT REQUIRED
Eye Protection:SAFETY EYEWEAR W/GUARDS
Supplemental Safety and Health

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:171/340
Vapor Pres:2
Vapor Density:4.9
Spec Gravity:1.232
Evaporation Rate & Reference:BUAC @ 1: 0.15
Solubility in Water:NEGLIGIBLE
Appearance and Odor:RED LIQUID WITH ALIPHATIC ODOR.
Percent Volatiles by Volume:62

Stability

Stability Indicator/Materials to Avoid:YES
GREASE,WATER
Stability Condition to Avoid:SPARKS,OPEN FLAMES
Hazardous Decomposition Products:CARB0N MONOXIDE
Conditions to Avoid Polymerization:ELEVATED TEMPERATURES.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL,STATE,AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.