BCZFV - 900D002
- MSDS: BCZFV
- Manufacturer: ENTERPRISE CHEMICAL COATING CO
- Product Name: 900D002
- National Stock Number: 8010-00-111-8055
Product Identification
Product ID:900D002
MSDS Date:01/01/1985
FSC:8010
NIIN:00-111-8055
MSDS Number: BCZFV
Responsible Party
Emergency Phone: 312-541-9000
Cage: 60035
Contractor
Cage: 60035
Ingredients
MINERAL SPIRITS
CAS: 64475-85-0
RTECS: PY8240000
Fraction By Weight: 35%
ACGIH TLV: 500 PPM
DIACETONE ALCOHOL
RTECS: HI5600000
Fraction By Weight: <5%
ACGIH TLV: 50 PPM
LEAD DRIER (OSHA PEL FROM 29CFR 1910.1025)
Fraction By Weight: <0.5%
OSHA PEL 0.05 MG/M3 (PB)
ACGIH TLV: 0.15 MG/M3 (PB);8990
Hazards
Effects of Overexposure:HEADACHE, NAUSEA, SKIN AND EYE IRITATION. PB
POISONING CHARACTERISTICS.
First Aid
First Aid:VAPORS-REMOVE FROM EXPOSURE. RESTORE BREATHING. NOTIFY
PHYSICIAN. EYES-(SPLASH)-FLUSH W WATER. MEDICAL TREATMENT.
SKIN(SPLASH)-WASH/SOAP AND WATER.
Fire Fighting
Flash Point:104F, 40C TCC
Lower Limits:0.7
Upper Limits:6.5
Extinguishing Media:ANY CLASS B FIRE EXTINGUISHER
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT/SELF-CONTAINED
BREATHING APPARATUS
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT, ELEC EQUIPMENT, SPARKS
AND OPEN FLAME
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID VAPORS.
VENTILATE AREA. CONTAIN & REMOVE WITH INERT ABSORBENT &
NON-SPARKING TOOLS.
Handling
Handling and Storage Precautions:LARGE QUANTITIES-OSHA 1910.106 BLDGS.
Other Precautions:CR CONTAINING. USE RESPIRATOR WHILE SPRAYING OR
SANDING.
Exposure Controls
Respiratory Protection:TC-23C-80 RESPIRATOR
Ventilation:LOCAL TO KEEP BELOW TLV VALUE.
Protective Gloves:NOT USUALLY REQ
Eye Protection:SAFETY GLASSES/SPLASH GOS
Supplemental Safety and Health
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:340F, 171C
Vapor Pres:2
Vapor Density:4.9
Spec Gravity:1.228
Evaporation Rate & Reference:0.15/BUTYL ALOHOL
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK LIQUID-ALIPHATIC ODOR
Percent Volatiles by Volume:62
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:SPARKS, OPEN FLAMES.
Hazardous Decomposition Products:CO COULD FORM DURING BURNING
Conditions to Avoid Polymerization:ELEVATED TEMPERATURES
Disposal
Waste Disposal Methods:IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.