BCZGG - GA6-004

Product Identification

Product ID:GA6-004
MSDS Date:01/01/1985
FSC:8010
NIIN:00-111-8345
MSDS Number: BCZGG

Responsible Party
ENTERPRISE CHEM.COATINGS CO.

Emergency Phone: 312-376-9150

Cage: KO115

Contractor
ENTERPRISE CHEMICAL COATING CO DIV OF INSILCO CORP
CHICAGO, IL 60608-5322 US

Cage: 60035

Ingredients

36% LEAD DRIER

Fraction By Weight: <0.5%


NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 40%

OSHA PEL 100 PPM


DIACETONE ALCOHOL (4-HYDROXY-4-METHYL-2-PENTANONE)

CAS: 123-42-2

RTECS: SA9100000

Fraction By Weight: <0.5%

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM; 9192

Hazards

Effects of Overexposure:HEADACHE,NAUSEA,SKIN AND EYE IRRITATION.LEAD
POISONING SYMPTOMS.

First Aid

First Aid:INHAL:MOVE TO FRESH AIR. RESTORE BREATHING. CALL DR.
EYES:FLUSH PROMPTLY WITH WATER. CALL DR.SKIN:WASH WITH SOAP AND
WATER.

Fire Fighting

Flash Point:40/104 TCC
Lower Limits:0.7
Upper Limits:6.5
Extinguishing Media:ANY CLASS B FIRE EXTINGUISHER
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT,ELECTRICAL
EQUIPMENT,SPARKS AND OPEN FLAME.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION.AVOID
VAPORS.VENTILATE AREA.CONTAIN AND REMOVE WITH INERT ABSORBENT AND
NON-SPARKING TOOLS.

Handling

Handling and Storage Precautions:STORE LARGE AMTS. IN BUILDINGS
DESIGNED AND PROTECTED FOR STORAGE COMPLIANCE WITH OSHA 1910.106

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED.
Ventilation:LOCAL EXHAUST TO KEEP BELOW TLV
Protective Gloves:NOT REQUIRED
Eye Protection:SAFETY EYEWEAR W/GUARDS
Supplemental Safety and Health

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:171/340
Vapor Pres:2
Vapor Density:4.9
Spec Gravity:1.232
Evaporation Rate & Reference:BUAC = 1: 0.15
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIQUID WITH ALIPAHTIC ODOR.
Percent Volatiles by Volume:62

Stability

Stability Indicator/Materials to Avoid:YES
GREASE,WATER
Stability Condition to Avoid:SPARKS,OPEN FLAMES
Hazardous Decomposition Products:CARBON MONOXIDE
Conditions to Avoid Polymerization:ELEVATED TEMP.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL,STATE,AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.