Product ID:GA4-00 MIL-E-52798
MSDS Date:01/01/1985
FSC:8010
NIIN:00-111-8356
MSDS Number: BCZGK

ENTERPRISE CHEM. COATINGS CO.

Emergency Phone: 312 376-9150

Cage: KO115

ENTERPRISE CHEMICAL COATING CO DIV OF INSILCO CORP

CHICAGO, IL 60608-5322 US

Cage: 60035

RULE 66 MINERAL SPIRITS

Fraction By Weight: 40%

ACGIH TLV: 500 PPM

DIACETONE ALCOHOL (4-HYDROXY-4-METHYL-2-PENTANONE)

CAS: 123-42-2

RTECS: SA9100000

Fraction By Weight: 0.5%

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM; 9192

LEAD DRIER (OSHA PEL FROM 29CFR 1910.1025)

Fraction By Weight: 0.5%

OSHA PEL 0.05 MG/M3 (PB)

ACGIH TLV: 0.15 MG/M3 (PB);8990

Effects of Overexposure:SKIN,EYE IRRIT. HEADACHE,NAUSEA, LEAD
POISONING-NAUSEA INDIGESTION, VOMITING WEAKNESS

First Aid:INHAL:REMOVE TO FRESH AIR.RESTORE BREATHING IF REQUIRED.
SKIN: WASH WITH SOAP AND WATER. EYE: FLUSH WITH PLENYT OF WATER.
INGEST: CALL DR.

Flash Point:104F 40C TCC
Lower Limits:0.7
Upper Limits:6.5
Extinguishing Media:ANY CLASS B FIRE EXTINGUISHER
Fire Fighting Procedures:SEE SUPP. DATA
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT. ELECTRICAL
EQUIPMENT,SPARKS, OPEN FLAME

Spill Release Procedures:REMOVE IGNITION SOURCES, VENTILATE AREA.AVOID
BREATHING VAPORS.CONTAIN AND REMOVE WITH INERT ABSORBENT AND
NON-SPARKING TOOLS.

Handling and Storage Precautions:STORE LARGE AMTS. IN BUILDINGS
DESIGNED AND PROTECTED FOR STORAGE IN COMPLIANCE WITH OSHA 1910.106
Other Precautions:NONE

Respiratory Protection:NOT NORMALLY REQUIRED
Ventilation:LOCAL EXHAUST
Protective Gloves:NOT REQUIRED
Eye Protection:GOGGLES/SAFETY GLASSES
Supplemental Safety and Health
FIRE FIGHTING-WEAR FULL PROTECTIVE EQUIP. INCLUDING SELF-CONTAINED
BREATHING APPAT.

HCC:F4
Boiling Pt:B.P. Text:340F 171 C
Vapor Pres:2
Vapor Density:4.9
Spec Gravity:1.228
Evaporation Rate & Reference:< BUTYL ACETATE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK LIQUID WITH ALIDHATIC ODOR
Percent Volatiles by Volume:62

Stability Indicator/Materials to Avoid:YES
GREASE, WATER
Stability Condition to Avoid:SPARKS, OPEN FLAME.
Hazardous Decomposition Products:CARBON MONOXIDE ON BURNING
Conditions to Avoid Polymerization:ELEVATED TEMP.

Waste Disposal Methods:IAW LOCAL,STATE, AND FED. REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.