Product ID:SCOTCHWELD STRUCTURAL ADHESIVE 2214TY1CL3
MSDS Date:01/01/1985
FSC:8040
NIIN:00-133-5501
MSDS Number: BDBCL

3M COMPANY

Emergency Phone: (612) 733-1110

Cage: 76381

MINNESOTA MINING AND MFG CO, DBA 3M

SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

EPICHLOROHYDRIN/POLYHYDROXYL POLYMER (W/POLYGLYCOL

POLYGLYCOL DIEPOXIDE RESIN (W/EPICHLOROHYDRIN/POLYHYDROXYL

PHENYL GLYCIDYL ETHER (PGE)

CAS: 122-60-1

RTECS: TZ3675000

OSHA PEL 10 PPM

ACGIH TLV: 1 PPM; 9293

1,4 BUTANEDIOL DIGLYCIDYL ETHER (COMBINED W/OTHER INGREDS,

DICYANDIAMIDE (COMBINED W/OTHER INGRED. FORMS APPROX 21% OF

Effects of Overexposure:EYES: IRRIT. SKIN: MOD IRRIT TO ALBINO RABBITS.
POSS SENSITIZATION IN CERTAN INDIV. AVOID DUST, VAP

First Aid:EYES: IMMED FLUSH W/PLENTY OF WATER FOR 10 MIN & CALL MD.
SKIN: WASH THOROUGHLY W/SOAP & WATER BEFORE ADHESIVE CURES. LAUNDER
CONTAM CLOTHING BEFORE REUSE. INH: AVOID VAPORS OF HEATED PRODUCT.
AVOID D UST OF CURED ADHES WHEN GRINDING OR SAWING.

Extinguishing Media:CO*2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE KNOWN

Spill Release Procedures:COLLECT SPILLED MATERIAL, CLEAN UP RESIDUE &
AREA. PLACE COLLECTED MATERIAL IN METAL CONTAINER.

Handling and Storage Precautions:AVOID EYE & SKIN CONTACT. AVOID
BREATHING VAPORS DURING HANDLING & CURE. USE ONLY IN WELL
VENTILATED AREAS W/ADEQ AIR MOVEMENT TO DILUTE VAPORS.
Other Precautions:USE LOCAL EXHAUST VENTILATION AT LOCATION WHERE
HEATED. AVOID BREATHING DUST FROM CURED PRODUCT WHEN GRINDING OR
SANDING. KEEP OUT OF REACH OF CHILDREN.

Ventilation:MFR RECM MECHANICAL VENTILATION, USE LOCAL EXHST WHEN
HEATED
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
ADD INGRED: SOLID DIMETHYL UREA DERIVATIVE & SILICA PIGMENT (COMBINED
W/1,4 BUTANEDIOL DIGLYCIDYL ETHER & DICYAN-DIAMIDE FORMS APPROX 21%
OF THE PRODUCT.) SILICA IS CAB-O-SIL, NIOSH VV7310000.

HCC:N1
Spec Gravity:1.15
Solubility in Water:SLIGHT
Appearance and Odor:CREAM COLORED VISCOUS PASTE
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:NO
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXPOS TO TEMP ABOVE ROOM TEMP FOR PRLNGD
PERIODS OF TIME.
Conditions to Avoid Polymerization:ELEVATED STORAGE TEMPERATURES

Waste Disposal Methods:MFR RECM INCINERATE IF IAW FED, STATE & LOCAL
CODES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.