BDDPC - R320-113 *R320-02 PRIMER COATING ALKYD

  • MSDS: BDDPC
  • Manufacturer: PRATT AND LAMBERT
  • Product Name: R320-113 *R320-02 PRIMER COATING ALKYD
  • National Stock Number: 8010-00-161-7425
Product Identification

Product ID:R320-113 *R320-02 PRIMER COATING ALKYD
MSDS Date:01/01/1985
FSC:8010
NIIN:00-161-7425
MSDS Number: BDDPC

Responsible Party
PRATT & LAMBERT
16116 E 13TH ST
WICHITA, KS 67201
US

Cage: PRATT

Contractor
PRATT AND LAMBERT INC
2153 CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

Ingredients

ZINC CHROMATE

CAS: 13530-65-9

RTECS: GB3290000

Fraction By Weight: <

OSHA PEL 0.1 MG/M3 (CRO3)

ACGIH TLV: 0.01MG/M3(CR)A1;9192


TRIETHYLAMINE (SARA III)

CAS: 121-44-8

RTECS: YE0175000

Fraction By Weight: <0.5%

OSHA PEL 25 PPM/15 STEL

ACGIH TLV: 10 PPM/15 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


MINERAL SPIRITS

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 35%

ACGIH TLV: 500 PPM


LEAD NAPHTHENATE 365

RTECS: OG1945000

Fraction By Weight: <0.5%


METHYL EHTYL KETOXIME

RTECS: PM7783000

Fraction By Weight: ,0.5%

Hazards

Effects of Overexposure:IRRIT OF NOSE,THROAT,EYES & POSS DIZZ & NAUSEA.
SPRAY MIST CONTAIN LEAD.LEAD POISON IS CHARACTE(SUPP

First Aid

First Aid:INHAL:REMOV FR EXPOS & PROVID FRESH AIR.SPLASH EYES,FLUSH
IMMED.W/LG AMTS OF WATR F/15 MIN.SPLASH SKN,REMOV CONTAMIN CLOTHING
& WASH AFFECTED AREA W/WATR.INGEST:DO NOT INDUC VOMITING.CONSULT A
PHYSICI AN IMMED IN ALL CASES.

Fire Fighting

Flash Point:104F TCC 40C
Extinguishing Media:CO*2,DRY CHEM,ALCOH FOAM,POLYMER FOAM PREF F/LARGE
FIRES.
Fire Fighting Procedures:SELF-CONTAINED BREATH APPARAT F/FIREMN.WATER
MAY BE INEFFECT
Unusual Fire/Explosion Hazard:KP CONTNRS TIGHT CLOS.ISOLAT FR
HEAT,ELECT EQPMT,SPARKS,OPN FLAM.DO NOT APPLY TO VERY HOT SURFACES.

Accidental Release

Spill Release Procedures:REMOV ALL SOURC OF IGNIT (FLAMS,HOT
SURFAC,ELECTRICAL,STATIC OR FRICTIONAL SPARKS.VENTILAT AREA & AVOID
BREATHING VAPORS.REVOV W/INERT ABSORBENT & NON-SPARKING TOOLS.STEPS
MUST BE TAKEN TO PREVENT CON TAMINATION OF GROND WATER OR STREAMS.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F.STORE LG
QUANTITIES IN COMPLIANCE W/OSHA 1910.106.CONTAINERS SHOULD BE
GROUNDED & BONDED TO THE RECEIVING CONTAINER.
Other Precautions:DO NOT CUT OR WELD ON EMPTY CONTAINER.DO NOT USE
UNTIL ALL SAFETY PRECAUTIONS HAVE BEEN READ & FULLY UNDERSTOOD BY
THE USER.

Exposure Controls

Respiratory Protection:MECH RESPIRAT TO REMOV OVERSPRA IN OUTDOOR OR
OPEN AREA.
Ventilation:PRVID GEN DILUT/LOC EXHAUST VENTILAT IN VOL TO KP BELOW TLV
Protective Gloves:SOLVNT IMPERMBL
Eye Protection:SAFETY EYEWEAR AGNST SPLA
Other Protective Equipment:USE PROTECTIV EQPMT TO PREVNT SKIN CONTACT.
Supplemental Safety and Health
EFFECTS OF OVEREXPOS:BY THE FOLLOWING:HDACHES,DIZZ, STAGGERING GAIT,
CONFUSION, UNCONSCIOUSNESS,OR COMA.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:311-375F
Vapor Density:HEAV
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:58

Stability

Stability Indicator/Materials to Avoid:YES
AVD CONTCT W/STRONG ACIDS OR ALKALINE MATERIALS.
Stability Condition to Avoid:FIRES,HEAT & HOT SURFACES.
Hazardous Decomposition Products:BRUNING WILL PRODUC SMOK & OXIDES OF
CARBON & LEAD.
Conditions to Avoid Polymerization:DO NOT DRIERS OR REACTV CHEM W/O
TECHNICAL SUPERVISION.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORD W/LOC,STATE & FED
REGULATIONS.INCINERATE IN EPA APPRVD FACILITY. DO NOT INCINERATE
CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.