BDGHS - CAT-A-LAST

  • MSDS: BDGHS
  • Manufacturer: AKZO COATINGS INC
  • Product Name: CAT-A-LAST
  • National Stock Number: 8010-00-181-7096
Product Identification

Product ID:CAT-A-LAST
MSDS Date:01/01/1985
FSC:8010
NIIN:00-181-7096
MSDS Number: BDGHS

Responsible Party
AKZO COATINGS INC
434 W. MEATS STREET
ORANGE, CA 92661
US

Emergency Phone: 714-637-1750; CHEMTREC 800-424-9300

Info Phone: 714-637-1750

Cage: 98502

Contractor
AKZO COATINGS INC
ORANGE, CA 92661 US

Telephone: 714-637-1750; CHEMTREC 800-424-9300

Cage: 98502

Ingredients

ADDITIVES

Fraction By Weight: .2%


INERT PIGMENTS

Fraction By Weight: 0.0%


COLOR PIGMENT* TITANIUM DIOXIDE

Fraction By Weight: 18.6%


ALIPHATIC ISOCYANATE PREPOLYMER

Fraction By Weight: 17.5%


POLYESTER RESIN

Fraction By Weight: 17.7%

Hazards

Effects of Overexposure:BREATHING VAPOR WILL BE IRRITATING TO NOSE AND
THROAT. MAY CAUSE NAUSEA & VOMITING.

First Aid

First Aid:INHALATION: REMOVE VICTIM TO FRESH AIR. CONSULT PHYSICIAN.
SKIN EXPOSURE: WASH AFFECTED AREA WITH SOAP AND WATER. EYE
EXPOSURE: FLUSH WITH WATER. CONSULT PHYSICIAN. INGESTION: INDUCE
VOMITING. CONSULT PHYSICIAN.

Fire Fighting

Flash Point:28F
Lower Limits:1.1
Extinguishing Media:USE CARBON DIOXIDE OR DRY CHEMICAL FOR SMALL FIRES
Fire Fighting Procedures:DO NOT APPLY TO HEATED SURFACES OR IN AREAS.
Unusual Fire/Explosion Hazard:WATER MAYBE INEFFECTIVE IN FIGHTING FIRES
EXCEPT IN A FINE SPRAY TO ABSORB HEAT.

Accidental Release

Spill Release Procedures:ABSORB MATERIAL WITH SAWDUST OR OIL-ABSORBING
COMPOUND. WASH AREA WITH DETERGENT ANDATER. USE ADEQUATE
VENTILATION TO CLEAR FUMES FROM AREA. AVOID SPARKS.

Handling

Other Precautions:STORE UNDER 100F.

Exposure Controls

Respiratory Protection:DEPENDING ON APPLICATION METHOD & FACILITIES, AN
AIR-SUPPLIED.
Ventilation:TO MEET 25 OF LEL UNDER SAME ASSUMPTION 700-800.
Protective Gloves:SOLVENT
Eye Protection:GOGGLES OR FACE SHIELDS
Other Protective Equipment:COVERALLS, APRON, NON-SPARKING SAFETY SHOES,
ETC.
Supplemental Safety and Health
SOLVENTS (N-BUTYL ACETATE, XYLENE, CELLOSOLVE ACETATE, MEK)

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:170-320F
Vapor Density:YES
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:60.0

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:STORAGE AT HIGH TEMPERATURES.
Hazardous Decomposition Products:CO, COMBUSTION PRODUCTS OF THE VARIOUS
PIGMENTS EMPLOYED.

Disposal

Waste Disposal Methods:INCINERATE WITH CARE. SANITARY LAND FILL
PREFERRED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.