BDGPR - MIL-L-9000H 9250 IMP-9000GB
- MSDS: BDGPR
- Manufacturer: IMPERIAL OIL CO INC
- Product Name: MIL-L-9000H 9250 IMP-9000GB
- National Stock Number: 9150-00-181-8097
Product Identification
Product ID:MIL-L-9000H 9250 IMP-9000GB
MSDS Date:06/02/1992
FSC:9150
NIIN:00-181-8097
MSDS Number: BDGPR
Responsible Party
MORGANVILLE, NJ 07751
US
Emergency Phone: 908-591-9400
Info Phone: 908-591-9400
Preparer: WILLIAM J. MAHONEY
Cage: 58563
Contractor
Telephone: 732-591-8825
Cage: 58563
Ingredients
REFINED HEAVY PARAFFINIC DISTILLATES/LUBE OIL BASE STOCK
CAS: 64741-88-4
Fraction By Weight: >98%
OSHA PEL 5 MG/M3 (OIL MIST)
ACGIH TLV: 5 MG/M3 (OIL MIST)
ZINC DIALKYLDITHIOPHOSPHATE & ZINC DIARYLDITHIOPHOSPHATE
CAS: 68649-42-3
Fraction By Weight: .03-.04%
DISTILLATES, HYDROTREATED HEAVY PARAFFINIC
CAS: 64742-54-7
RTECS: PY8035500
Fraction By Weight: .6-.7%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
CHLORINE AS CHLORO-ORGANO COMPLEX
Fraction By Weight: .04-.05%
CALCIUM AS PHENATE AND/OR SULFONATE
Fraction By Weight: 0.4-0.5%
Hazards
LD50 LC50 Mixture:LD50 (ORAL RAT) IS NOT AVAILABLE
Reports of Carcinogenicity:NTP:UNKNOWN IARC:UNKNOWN OSHA:NO
Health Hazards Acute and Chronic:SKIN: WHILE THIS PRODUCT MAY IRRITATE
THE SKIN FROM PROLONGED SKIN CONTACT, THERE IS NO MEDICAL OR
TOXICOLOGICAL EVIDENCE THAT IT IS AN IRRITANT, A CORROSIVE OR A
CARCINOGEN. IT HAS A LOW ORDER OF ORA L & DERMAL TOXICITY.
INHALATION: MIST MAY CAUSE PULMONARY PROBLEMS. IF NOT TREATED, MAY
CAUSE PULMONARY INJURY.
Explanation of Carcinogenicity:BASED UPON AVAILABLE DATA & TECHNOLOGY,
THIS PRODUCT IS NOT CONSIDERED TO BE TOXIC OR CARCINOGENIC TO
HUMANS.
Effects of Overexposure:THE SIGNS AND SYMPTOMS OF OVER-EXPOSURE ARE
UNKNOWN.
Medical Cond Aggravated by Exposure:DIRECT CONTACT WITH THE EYES MAY
CAUSE EYE IRRITATION. PROLONGED SKIN CONTACT MAY CAUSE SKIN
IRRITATION.
First Aid
First Aid:EYES: PURGE EYES WITH COPIOUS AMOUNTS OF WATER. SKIN: CLEANSE
WITH WATERLESS SOAP FOLLOWED BY THOROUGH WASHING WITH SOAP AND
WATER. INGESTION: DO NOT INDUCE VOMITING. CALL A PHYSICIAN
IMMEDIATELY
Fire Fighting
Flash Point:450F,232C
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR MESA/NIOSH APPROVED SELF-CONTAINED
BREATHING APPARATUS. USE WATER SPRAY TO COOL EXPOSED TANKS, DRUMS
AND PERSONNEL.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:CONTAIN WITH INERT MATERIAL (FULLERS EARTH,
SAND,OIL DRY,ETC.).PREVENT MATERIAL FROM GETTING INTO SEWERS AND
OPEN BODIES OF WATER.AREA MAY BE SLIPPERY-PREVENT FALLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:THESE LUBRICANTS BECOME VERY VISCOUS
WHEN STORED AT LOW TEMPERATURES. THEY CONGEAL AT -12 TO -32C. USE
PRODUCT WITH CAUTION AROUND OPEN FLAMES, SPARKS
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE SUPPLIED-AIR RESPIRATORY PROTECTION IN
CONFINED OR ENCLOSED SPACES IF NEEDED.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS
Eye Protection:SPLASH GOGGLES
Other Protective Equipment:EYE WASH STATION AND SAFETY SHOWER.
INDUSTRIAL-TYPE WORK CLOTHING AND APRON AS REQUIRED.
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING AND LAUNDER OR DRY
CLEAN BEFORE RE-USE. OIL SOAKED SHOES SHOULD BE DISCARDED.
Supplemental Safety and Health
EMPTY CONTAINER WARNING: CONTAINERS RETAIN RESIDUE (LIQUID AND/OR
VAPOR) AND CAN BE DANGEROUS. DO NOT PRESSURIZE, CUT, WELD, BRASE,
SOLDER, DRILL, GRIND OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME,
SPARK S OR OTHER SOURCES OF IGNITION: THEY MAY EXPLODE AND CAUSE
INJURY. DO NOT ATTEMPT TO CLEAN EMPTY DRUMS.
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:600F,316C
Melt/Freeze Pt:M.P/F.P Text:0
Vapor Pres:1
Vapor Density:1
Spec Gravity:1 (WATER=1)
Evaporation Rate & Reference:<1 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK RED - ODORLESS
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:ONLY WHEN BURNING-CARBON MONOXIDE AND
CARBON DIOXIDE, SULFUR AND NITROGEN COMPONENTS.
Disposal
Waste Disposal Methods:INCINERATE IN APPROVED EQUIPMENT OR LANDFILL
CONTAMINATED DIKING MATERIAL ACCORDING TO CURRENT LOCAL, STATE AND
FEDERAL REGULATIONS. THIS APPLIES TO UNRECOVERABLE LIQUID AS WELL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.