BDGWY - 142,082BY

Product Identification

Product ID:142,082BY
MSDS Date:01/01/1985
FSC:7510
NIIN:00-183-7697
MSDS Number: BDGWY

Responsible Party
CROWN INDUSTRIAL PRODUCTS COMPANY
STATE LINE ROAD
HEBRON, IL 60034
US

Cage: 92381

Contractor
CROWN INDUSTRIAL PRODUCTS CO
350 HEBRON, IL 60034 US

Telephone: 815-648-2424

Cage: 92381

Ingredients

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: >10%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


KETONES

Fraction By Weight: >30%

ACGIH TLV: 100-1000 PPM


PROPELLANT

Fraction By Weight: 25%

ACGIH TLV: 1000 PPM


PIGMENT

Fraction By Weight: >10%


ACRYLIC RESIN

Fraction By Weight: <5%

Hazards

Effects of Overexposure:DIZZINESS, NAUSEA, HEADACHE

First Aid

First Aid:REMOVE TO FRESH AIR. GIVE ARTIF.RESPIRATION IF NECESSARY.
EYES-WASH W COPIOUS AMTS OF WATER. SKIN WASH W SOAP & WATER. IF
IRRITATION PERSISTS, CALL A PHYSICIAN.

Fire Fighting

Flash Point:<20F,<-7C
Lower Limits:1.8
Upper Limits:9.5
Extinguishing Media:CO2, FOAM, DRY CHEM
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:TREAT AS CYLINDERS OF COMPRESSED GAS

Accidental Release

Spill Release Procedures:VENTILATE WELL. REMOVE.ALL SOURCES OF
COMBUSTION. WIPE UP W INERT MAT'LS & PLACE IN APPROPRIATE
COATAINERS.

Handling

Handling and Storage Precautions:DO NOT SPRAY INTO OR AROUND OPEN FLAME
OR SPARK. EXPOSURE TO TEMP OVER 120F MAY CAUSE BURSTING. AVOID SKIN
COMTACT
Other Precautions:USE ONLY AS DIRECTED. INTENTIONAL MISURE BY
INTENRTIONALLY CONCENTRATING VAPORS & INHALING CAN BE HARMFUL OR
FATAC.

Exposure Controls

Ventilation:LOCAL EXHAUST
Protective Gloves:OPTIONAL
Eye Protection:GOGGLES IF SPRAYING
Supplemental Safety and Health

Chemical Properties

HCC:V3
Boiling Pt:B.P. Text:>133F,56C
Vapor Pres:186
Vapor Density:>AIR
Spec Gravity:0.888
Evaporation Rate & Reference:>1 BUAX
Solubility in Water:NONE
Percent Volatiles by Volume:>80

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:SPARKS & OPEN FLAMES
Hazardous Decomposition Products:CO, CO2

Disposal

Waste Disposal Methods:AEROSOL CONTAINER: DO NOT PUNCTURE OR INCINERATE
CAN. WHEN ALL LIQUID IS EXPELLED, CONTINUE TO DEPRESS BUTTON UNTIL
GSA IS EXPELLED. PLACE CONTAINER IN APPROPRIATE DISPOSAL UNIT.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.