BDGXQ - ACETONE
- MSDS: BDGXQ
- Manufacturer: UNION CARBIDE CORP(MFR) PHIPPS PRODUCTS(DIST)
- Product Name: ACETONE
- National Stock Number: 6810-00-184-4796
Product Identification
Product ID:ACETONE
MSDS Date:01/01/1985
FSC:6810
NIIN:00-184-4796
MSDS Number: BDGXQ
Responsible Party
DANBURY, CT 06817-0001
US
Emergency Phone: 800-822-4357
Info Phone: 800-822-4357
Cage: 61637
Contractor
Telephone: 800-822-4357/732-563-5522 (MSDS)
Cage: 61637
Ingredients
ACETONE (SARA III)
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 100%.
OSHA PEL 1000PPM
ACGIH TLV: 750PPM/1000STEL;9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Effects of Overexposure:PRODUCES A STATE OF STUPOR.VAPOR IRRITATING TO
EYES & MUCOUS MEMBRANES;ANETHETIC,IRRITG TO MEMBRANE
First Aid
First Aid:REMOVE TO FRESH AIR.SKIN:ONLY A SLIGHT HAZARD;FLUSH WITH
WATER. EYE:MODERATE HAZARD,FLUSH WITH WATER FOR 15 MIN. CALL A
DOCTOR.
Fire Fighting
Flash Point:4F TOC
Autoignition Temp:Autoignition Temp Text:1000F.
Lower Limits:2.6.
Upper Limits:12.8
Extinguishing Media:CO*2,DRY CHEMICAL FOR SMALL FIRES.ALCOHOL FOAM FOR
LG.FIRES.
Fire Fighting Procedures:DILUTION OF BURNING LIQUID W/WATER WILL EFFECT
EXTINGUISHMNT
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION.FLUSH
HEAVILY W/WATER.STOP DISCHARGE IF POSSIBLE.
Handling
Handling and Storage Precautions:DANGER!EXTREMELY FLAMMABLE.KEEP AWAY
FROM HEAT,SPARKS,AND FIRE.DO NOT LEAVE CONTAINER OPEN.USE
W/ADEQUATE VEMTO+ATOPM.AVOID PROLONGED OR RPTD.CONTACT.
Other Precautions:DO NOT USE COPPER.NOT FOR USE AS A DRUG UNLESS
CLEARLY ESTABLISHED AS SAFE FOR THAT PURPOSE.
Exposure Controls
Respiratory Protection:FACE MASK(FULL)W/ORGANIC CHEMICAL CANISTER OR
SUPPLIED APR.
Ventilation:LOCAL EXHAUST IS PREFERRED & MECHANICAL IS ACCEPTABLE.
Protective Gloves:RUBBER,VINYL
Eye Protection:FACE SHIELD
Other Protective Equipment:-------
Supplemental Safety and Health
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:133F
Vapor Pres:186
Vapor Density:2.0.
Spec Gravity:0.7905
Evaporation Rate & Reference:14.48,BUTYL ACET.
Solubility in Water:COMPLETE
Appearance and Odor:HIGHLY FLAMMABLE LIQUID;SHARP,PENETRATING,RES,ODOR
Percent Volatiles by Volume:99.9
Stability
Stability Indicator/Materials to Avoid:YES
BA(OH)*2,NAOH,& OTHER ALKALIES;SULFURIC ACID.
Stability Condition to Avoid:LOW TEMP
Hazardous Decomposition Products:NONE
Conditions to Avoid Polymerization:LOW TEMPS.IN PRESENCE OF
CATALYSTS-COND.OCCURS;TEMP.RISES.CL
Disposal
Waste Disposal Methods:ATOMIZE INTO AN INCINERATOR.DANGEROUS TO
AQUATIC-LIFE-IN HIGH CONCENTRATIONS.MAY BE DANGEROUS IF IT ENTERS
WATER INTAKES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.