Product ID:ACETONE
MSDS Date:01/01/1985
FSC:6810
NIIN:00-184-4796
MSDS Number: BDGXT

PHIPPS PRODUCTS CORPORATION

186 LINCOLN ST SUITE 502
BOSTON, MA 02111-2403
US

Cage: 86511

PHIPPS PRODUCTS CORP

BOSTON, MA 02111-2403 US

Telephone: OUT OF BUSINESS

Cage: 86511

ACETONE (SARA III)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 100%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Effects of Overexposure:PRODUCES A STATE OF STUPOR.

First Aid:REMOVE TO FRESH AIR. SKIN CONTACT IS ONLY A SLIGHT HAZARD;
HOWEVER, SKIN SHOULD BE FLUSHED WITH WATER. MODERATE HAZARD TO THE
EYE, BUT LIQUID CONTACT SHOULD BE TREATED WITH FLUSHING OF EYE WITH
WATER FOR 15 MINUTES.

Flash Point:4F TOC(-3F TCC)
Lower Limits:2.6
Upper Limits:12.8
Extinguishing Media:CO*2 OR DRY CHEMICAL FOR SML FIRES-FOAM FOR LG
FIRES.
Fire Fighting Procedures:DILUTION OF BURNING LIQUID WITH WATER WILL
EFFECT EXTINGUISH
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. FLUSH
HEAVILY WITH WATER.

Handling and Storage Precautions:ELIMINATE ALL SOURCES OF IGNITION. USE
WITH ADEQUATE VENTILATION. DO NOT LEAVE CONTAINER OPEN. AVOID
PROLONGED OR REPEATED CONTACT WITH SKIN.
Other Precautions:DO NOT USE COPPER.WEAR RUBBER GLOVES,RUBBER
APRONS,CHEMICAL GOGGLES,SELF-CONTAINED BREATHING APPARATUS OR HOSE
MASK WITH BLOWER,FULL MASK FACE PIECE. DO NOT SHIP
W/FOODS,EXPLOSIVES,OXIDIZERS.

Respiratory Protection:FULL FACE MASK WITH ORGANIC CHEMICAL CANISTER OR
SUPPLIED AIR.
Ventilation:LOCAL EXHAUST IS PREFERRED. MECHANICAL IS ACCEPTABLE.
Protective Gloves:RUBBER
Eye Protection:FACE SHIELD
Supplemental Safety and Health

HCC:F2
Boiling Pt:B.P. Text:133F
Vapor Pres:186
Vapor Density:2.0
Spec Gravity:0.7905
Evaporation Rate & Reference:14.48,BUTYL ACET.
Solubility in Water:COMPLETE
Appearance and Odor:HIGHLY FLAMMABLE LIQUID; SHARP, PENETRATING ODOR.
Percent Volatiles by Volume:99.9

Stability Indicator/Materials to Avoid:YES
CATALYSTS SUCH AS BA (OH*2, NAOH) & OTHER ALKALIES; H*2SO*4.
Stability Condition to Avoid:LOW TEMPERATURES.
Hazardous Decomposition Products:NONE
Conditions to Avoid Polymerization:LOW TEMPERATURES IN PRESENCE OF
CATALYSTS-COND. WILL OCCUR.

Waste Disposal Methods:ATOMIZE INTO AN INCINERATOR UNDER APPROVED
CONTROLLED PROCEDURES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.