BDJLY - EXT MAGNESIUM WELDING ROD AZ92A

  • MSDS: BDJLY
  • Manufacturer: J B ALLOY COMPANY
  • Product Name: EXT MAGNESIUM WELDING ROD AZ92A
  • National Stock Number: 3439-00-204-3280
Product Identification

Product ID:EXT MAGNESIUM WELDING ROD AZ92A
MSDS Date:01/01/1987
FSC:3439
NIIN:00-204-3280
MSDS Number: BDJLY

Responsible Party
J.B.ALLOY COMPANY

Emergency Phone: (713)941-6950

Cage: KO602

Contractor
J.B.ALLOY COMPANY
230070 HOUSTON, TX 77011 US

Telephone: 713-926-3232

Cage: KO602

Ingredients

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 9.0%

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9192


ZINC (SARA III)

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 2.0%

OSHA PEL 10 MG ZNO/M3

ACGIH TLV: 10 MG ZNO/M3; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 0.15%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293


BERYLLIUM (SARA III)

CAS: 7440-41-7

RTECS: DS1750000

Fraction By Weight: <.01%

OSHA PEL 2 UG/M3

ACGIH TLV: 0.002PPM; A2; 9293


MAGNESIUM

CAS: 7439-95-4

RTECS: OM2100000

Fraction By Weight: <89%

Hazards

Effects of Overexposure:EYES:MECHANICAL INJURY; INHAL:DUST/FUME CAUSE
NUISANCE; INGESTION/SKIN:NO EFFECTS.

First Aid

First Aid:REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF NEED. SKIN:WASH WITH
SOAP & WATER. EYES:FLUSH WITH WATER 15 MIN. KEEP WARM AND QUIET

Fire Fighting

Flash Point:NONE
Extinguishing Media:MELTING FLUX,DRY SAND,META EXTNGSHR
POWDER(GI,MET-L-X,ETC)
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG,APP H*20 SPRAY TO COOL
CONTR.
Unusual Fire/Explosion Hazard:USE OF WATER ON MOLTEN MAGNESIUM WILL
PRODUCE HYDROGEN GAS & MAY CAUSE AN EXPLOSION

Accidental Release

Spill Release Procedures:USE APPROPRIATE SAFETY EQUIPMENT. COLLECT &
CONTAIN IN A BOX/CONTAINER. REUSE IF POSSIBLE OR SEND FOR
RECLAMATION PLANT IF CONTAMINATED WITH HEAVY OILS.

Handling

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED
AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT. KEEP
CONTAINERS TIGHTLY CLOSED
Other Precautions:NOT KNOWN

Exposure Controls

Respiratory Protection:IF EXPOSD TLV,NIOSH/MESA APPR SELF-CNTND BRTHG
APP (POS PR MODE)
Ventilation:NORMAL ROOM VENTILATION.
Protective Gloves:AS REQUIRED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:FIRE RESISTANT CLOTHG & GLOVES AROUND
MELTING/HEAT TREATMENT
Supplemental Safety and Health
MSDS FM MFR DTD:8/5/80

Chemical Properties

HCC:N1
Spec Gravity:1.82
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SILVER SOLID. ODORLESS

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NOT KNOWN
Hazardous Decomposition Products:OXIDES OF BE, MG, MN & AL ON HIGH TEMP
(>830F)

Disposal

Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.