BDMFG - SOLID AG 1.50;LEAD-TIN-SILVER ALLOY

  • MSDS: BDMFG
  • Manufacturer: GARDINER SOLDER CO
  • Product Name: SOLID AG 1.50;LEAD-TIN-SILVER ALLOY
  • National Stock Number: 3439-00-239-2940
Product Identification

Product ID:SOLID AG 1.50;LEAD-TIN-SILVER ALLOY
MSDS Date:01/01/1987
FSC:3439
NIIN:00-239-2940
MSDS Number: BDMFG

Responsible Party
GARDINER SOLDER CO

Emergency Phone: (312)968-6593

Cage: 56244

Contractor
GARDINER SOLDER CO, DIV OF GARDINER METAL CO
CHICAGO, IL 60632-1416 US

Telephone: 312-847-0100/800-424-9300(CHEMTREC)

Cage: 56244

Ingredients

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 97.5%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


SILVER (SARA III)

CAS: 7440-22-4

RTECS: VW3500000

Fraction By Weight: 1.75%

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 0.75%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

Hazards

Effects of Overexposure:WHEN AIRBORNE,MAY CAUSE
HEADACHE,NAUSEA,VOMITING;FLUX MAY GIVE SAME SYMPTM;DURING ITS
USE,USE CARE.

First Aid

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Fire Fighting

Flash Point:NONE
Fire Fighting Procedures:AT HIGH TEMP (2000F) USE NIOSH APPROVED SCBA.
Unusual Fire/Explosion Hazard:MODERATE IN THE FORM OF DUST WHEN EXPOSED
TO FLAME.

Accidental Release

Spill Release Procedures:USE PROPER PERSONAL PROTECTION.PICK UP AND
REUSE.VERY FINE DUST SHOULD BEST BE VACUUMED AND RECOVER FOR PROPER
DISPOSAL.

Handling

Handling and Storage Precautions:STORE IN DRY AND GOOD VENTILATED
AREA.WASH AFTER EACH USE.
Other Precautions:AVOID METAL DUST/FUMES.USE PROPER PERSONAL PROTECTION
DURING SOLDERING,OBSERVE PERSONAL HYGIENE.DO NOT SMOKE,EAT IN
SOLDERING AREA.

Exposure Controls

Respiratory Protection:IN CASE OF METAL DUST/FUMES USE NIOSH/MSHA
APPROVED RESPIRATOR/SCBA
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:TYPE AS REQD
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:FULL PROTECTIVE CLOTHING,SAFETY SHOWER,EYE
WASH STATION
Supplemental Safety and Health
MSDS UNDATED.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:3164F/1740C
Vapor Pres:1.8
Spec Gravity:11.20
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK GRAY ALLOY, NO ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
WITH OXIDIZING ACIDS.
Stability Condition to Avoid:NONE NOTED
Hazardous Decomposition Products:NONE NOTED BY THE MFR.MAY GIVE METAL
FUMES OF PB,AG,SN

Disposal

Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.