BDQXB - 921R2104 EPOXY PRIMER PART A
- MSDS: BDQXB
- Manufacturer: SCM GLIDDEN COATINGS AND RESINS DIV
- Product Name: 921R2104 EPOXY PRIMER PART A
- National Stock Number: 8010-00-264-8866
Product Identification
Product ID:921R2104 EPOXY PRIMER PART A
MSDS Date:01/01/1985
FSC:8010
NIIN:00-264-8866
MSDS Number: BDQXB
Responsible Party
CLEVELAND, OH 44115
US
Cage: DO630
Contractor
Telephone: (216) 826-5566
Cage: DO630
Ingredients
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 22%.
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
LEAD (SARA III)
CAS: 7439-92-1
RTECS: OF7525000
Fraction By Weight: 10.0%
OSHA PEL 0.05 MG/M3;1910.1025
ACGIH TLV: 0.15 MG/M3;DUST 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
CHROMIUM ION (CR 6+)
CAS: 18540-29-9
RTECS: GB6262000
Fraction By Weight: 0.65%
OSHA PEL C, 0.1 MG/M3 (CRO3)
ACGIH TLV: 0.05 MG/M3 (CR);8990
2-METHOXYETHANOL (EGME) (SARA III)
CAS: 109-86-4
RTECS: KL5775000
Fraction By Weight: 4.0%
OSHA PEL S, 25 PPM
ACGIH TLV: S, 5 PPM; 9192
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 3%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Effects of Overexposure:IRRIT OF YEYS,SKIN, RESP TRACT. HDACHE,DIZZ,
UNCONSCIOUSNESS,OR COMA. DERMATITIS ON PROLONG CONTACT.
First Aid
First Aid:MOVE TO WELL VENTIL AREA; RESTORE BREATHING; CALL MD. SKIN.
WIPE W/CLEAN EYE: FLUSH THOROUGHLY W/WATER. CALL MD.
Fire Fighting
Flash Point:20 F TCC
Lower Limits:1.0
Extinguishing Media:CO*2, DRY CHEMICAL OR FOAM
Fire Fighting Procedures:H*2O MAYBE INEFFECT,BUT USE TO COOL HEAT
EXPOSED CONTAINERS
Unusual Fire/Explosion Hazard:KEEP AWAY FROM SOURCES OF
IGNITION.CONTNRS MAY EXPLODE W/EXTREME HEAT: DO NOT APPLY TO HOT
SURFACE.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION; VENTILATE
AREA.; MOP SPILS W/INERT ABSORBENT. BURN SWEEPINGS IN SAFE AREA
Handling
Handling and Storage Precautions:STORE BELOW 100F KEEP CONTAINERS
CLOSED & AWAY FROM SOURCES OF IGNITION.
Other Precautions:AVOID PROLONGED CONTACT W/SKIN & BREATHING VAPORS OR
SPRAY MIST. DO NOT TAKE INTERNALLY. VAPOR PRESSURE GIVEN IS FOR
METHYL ETHYL KETONE.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPRVD DEVICE FOR EXPOSURE OF CONCERN
Ventilation:DILUTION OR LOCAL EXHAUST TO KEEP VAPORS BELOW TLV
Protective Gloves:SOLVENT RESIST
Eye Protection:SPLASH PROOF GOGGLES
Supplemental Safety and Health
ALSO KNOWN AS RGL-33322A PART A OF 2 PART PROD.PART B IS 92102100
CATALYST. CARE HUMAN CARCINOGENS. CONTAINS METN ISOBUTKETONE
5%-TLV: 50 PPM.KEY1:J1.
Chemical Properties
Boiling Pt:B.P. Text:172 TO 311F
Vapor Pres:70
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER.
Percent Volatiles by Volume:55.7
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID CONTAM W/FOREIGN MATERIALS.
Hazardous Decomposition Products:CO & POSSIBLE ACRID FUMES ON IGNITION
Disposal
Waste Disposal Methods:DO NOT INCINERATE CLOSED CONTAINERS. DISPOSE IN
ACCORD W/LOCAL,STATE, AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.