BDQXC - 921-02100 CATALYST, PART B
- MSDS: BDQXC
- Manufacturer: SCM GLIDDEN COATINGS AND RESINS DIV
- Product Name: 921-02100 CATALYST, PART B
- National Stock Number: 8010-00-264-8866
Product Identification
Product ID:921-02100 CATALYST, PART B
MSDS Date:01/01/1985
FSC:8010
NIIN:00-264-8866
MSDS Number: BDQXC
Responsible Party
CLEVELAND, OH 44115
US
Cage: DO630
Contractor
Telephone: (216) 826-5566
Cage: DO630
Ingredients
2-ETHOXYETHANOL (EGEE) (SARA III)
CAS: 110-80-5
RTECS: KK8050000
Fraction By Weight: 24%
OSHA PEL S,200 PPM
ACGIH TLV: S, 5 PPM; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
DIETHYLENE TRIAMINE
CAS: 111-40-0
RTECS: IE1225000
Fraction By Weight: 8%
OSHA PEL 1 PPM
ACGIH TLV: S, 1 PPM; 9192
METHYL ISOBUTYL KETONE (SARA III)
CAS: 108-10-1
RTECS: SA9275000
Fraction By Weight: 24%
OSHA PEL 100 PPM/75 STEL
ACGIH TLV: 50 PPM/75 STEL; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 24%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:EYE,SKIN, RESP TRACT IRRIT. HEADACHE, DIZZ,
UNCONSCIOUSNSS, OR COMA. DERMATITIS ON PROLNGD CONTACT
First Aid
First Aid:FUMES:MOVE TO WELL VENTILATED AREA;RESTORE BREATHING; CALL
MD. SKIN:WIPE W/CLEAN CLOTH; WASH THORLY W/SOAP & WATER. EYE:FLUSH
THOROUGHLY W/WATER. CALL MD.
Fire Fighting
Flash Point:60 F TCC
Lower Limits:1.0
Extinguishing Media:CO*2, DRY CHEMICAL OR FOAM
Fire Fighting Procedures:H*2O MAY BE INEFFECT,BUT USE TO COOL HEAT
EXPOSED CONTAINERS
Unusual Fire/Explosion Hazard:KEEP AWAY FROM SOURCES OF IGNITION.
CONTNRS MAY EXPLODE W/EXTREME HEAT: DO NOT APPLY TO HOT SURFACE.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION; VENTILATE
AREA; MOP SPILLS W/INERT ABSORBENT. BURN SWEEPINGS IN SAFE AREA-MFG
REC.
Handling
Handling and Storage Precautions:STORE BELOW 100 F. KEEP CONTAINERS
CLOSED & AWAY FROM SOURCES OF IGNITION.
Other Precautions:AVOID PROLONGED CONTACT W/SKIN & BREATHING VAPORS OR
SPRAY MIST. DO NOT TAKE INTERNALLY. VAPOR PRESSURE GIVEN IS FOR
METHYL ISOBUTYL KETONE.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPRVD DEVICE FOR EXPOSURE OF CONCERN
Ventilation:DILUTION OR LOCAL EXHAUST TO KEEP VAPORS BELOW TLV
Protective Gloves:SOLVENT RESIST
Eye Protection:SPLASH PROOF GOGGLES
Supplemental Safety and Health
PART B OF 2-PART PRODUCT. PART A IS 921R 2104. CONFORMS TO MIL SPEC
MIL-P-52192 B.KEY1:J1.
Chemical Properties
Boiling Pt:B.P. Text:237 TO 419F
Vapor Pres:15
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER.
Percent Volatiles by Volume:83.9
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID CONTAM W/FOREIGN MATERIALS
Hazardous Decomposition Products:CO & POSSIBLE NITROUS FUMES ON
IGNITION NO
Disposal
Waste Disposal Methods:DO NOT INCINERATE CLOSED CONTAINERS. DISPOSE IN
ACCORD W/LOCAL,STATE, & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.