BDVNB - OXYMETHYLENE
- MSDS: BDVNB
- Manufacturer: SHAPE PRODUCTS
- Product Name: OXYMETHYLENE
- National Stock Number: 6810-00-291-8392
Product Identification
Product ID:OXYMETHYLENE
MSDS Date:01/01/1985
FSC:6810
NIIN:00-291-8392
MSDS Number: BDVNB
Responsible Party
OAKLAND, CA 94621-4427
US
Emergency Phone: 415-534-1186
Info Phone: 415-534-1186
Cage: 3D869
Contractor
Telephone: 510-534-1186 OR 800-444-0015
Cage: 3D869
Ingredients
FORMALDEHYDE (SARA III)
CAS: 50-00-0
RTECS: LP8925000
Fraction By Weight: 37.0%
OSHA PEL SEE 1910.1048
ACGIH TLV: C 0.3 PPM; A2; 9293
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
METHYL ALCOHOL (METHANOL) (SARA III)
CAS: 67-56-1
RTECS: PC1400000
Fraction By Weight: 10.0%
OSHA PEL S,200PPM/250STEL
ACGIH TLV: S,200PPM/250STEL; 93
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Effects of Overexposure:ON SKIN: CAN CAUSE IRRIT. BURN EYES/SKIN.
First Aid
First Aid:SKIN/EYES: FLUSH W/WATER. IF IN EYES GET DOCTOR. IF SWALLOWED
INDUCE VOMITING. IF BREATHED, REMOVE TO FRESH AIR.
Fire Fighting
Flash Point:155F CC
Lower Limits:7.0
Extinguishing Media:ALCOHOL FOAM, WATER FOG, CO*2
Fire Fighting Procedures:USE SELF-CNTND BRTHNG APPARATUS W/FULL FACE
PIECE
Unusual Fire/Explosion Hazard:VAPORS HEAVIER THAN AIR, MAY TRAVEL ALONG
GROUND & IGNITED BY DISTANT FLAME SOURCE.
Accidental Release
Spill Release Procedures:SM SPILL: EVAPORATE BY HEATING IN HOOD. LG
SPILL: DESTROY BY APPRVD INCINERATION.
Handling
Handling and Storage Precautions:EMPTY DRUMS SHOULD BE COMPLETELY
EMPTIED OF RESIDUAL FLUID.
Exposure Controls
Respiratory Protection:USE SELF-CNTND BRTHNG APPARATUS
Ventilation:MECH TO KEEP BELOW TLV
Protective Gloves:NEOPRENE
Eye Protection:ANTI-SPLASH GOGGLES
Other Protective Equipment:IMPERVIOUS CLOTHING/BOOTS
Supplemental Safety and Health
Chemical Properties
HCC:T3
Boiling Pt:B.P. Text:214F
Vapor Pres:10
Vapor Density:1.1
Spec Gravity:0.82
Appearance and Odor:STRONG PUNGENT ODOR, COLORLESS LIQ
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:ABSORB SM SPILL & TRANSFER TO HOOD. LG SPILL:
DIKE TO PREVENT SPREAD. PUMP TO SALVAGE TANK. USE ABSORBENT MATL TO
PREVENT RUN-OFF.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.