BDWCC - P-441A
- MSDS: BDWCC
- Manufacturer: KOPPERS COMPANY INC
- Product Name: P-441A
- National Stock Number: 8010-00-297-0593
Product Identification
Product ID:P-441A
MSDS Date:01/01/1985
FSC:8010
NIIN:00-297-0593
MSDS Number: BDWCC
Responsible Party
Emergency Phone: 213-726-8666
Cage: EO463
Contractor
Cage: EO463
Ingredients
ALIPHATIC HYDROCARBONS
ACGIH TLV: 130 PPM
BUTYL ALCOHOL
RTECS: EK8750000
ACGIH TLV: 50 PPM
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ZINC CHROMATE
CAS: 13530-65-9
RTECS: GB3290000
OSHA PEL 0.1 MG/M3 (CRO3)
ACGIH TLV: 0.01MG/M3(CR)A1;9192
Hazards
Effects of Overexposure:VAPORS- 50PPM IRRITATE EYES,NOSE&THROAT. HIGHER
CONC-DROWSINESS,DIZZINESS FOLLOWED BY COMA.
First Aid
First Aid:VAPORS-REMOVE TO FRESH AIR. IF NOT BREATHING GIVE ARTIFICIAL
RESPIRATION. CALL DOCTOR. SKIN-WASH THOROUGHLY W SOAP & WATER.
EYES-FLUSH W LGE AMTS WATER FOR 15 MIN.-GET MEDICAL AID.
INGESTION-DO NOT IN DUCE VOMITING.CALL DOCTOR IMMEDIATELY
Fire Fighting
Flash Point:50F, 10C TCC
Extinguishing Media:WATER, FOG, DRY CHEM OR CO2.
Fire Fighting Procedures:AIR SUPPLIED EQUIP/ENCLOSED AREA, COOL FULL
CONTAINERS/WATER
Unusual Fire/Explosion Hazard:KEEP AWAY FROM HEAT, SPARK OR OPEN FLAME
Accidental Release
Spill Release Procedures:RECOVER ALL POSSIBLE, THEN WIPE UP W RAGS,
SAWDUST, ETC. REMOVE ALL SOURCES OF IGNITION.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED. AVOID FLAMES,
WELDING, SMOKING,SPARKS, OPEN LIGHTS, ETC.
Other Precautions:MAINTAIN GOOD PERSONAL HYGIENE. DO NOT USE IN
CONFINED AREAS, TANK OR PIT WO ADEQUATE VENTILATION.
Exposure Controls
Ventilation:LOCAL & MECHANICAL
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Supplemental Safety and Health
Chemical Properties
HCC:V3
Vapor Density:>AIR
Evaporation Rate & Reference:MODERATELY FAST
Solubility in Water:SLIGHT
Appearance and Odor:TYPICAL PAINT ODOR
Percent Volatiles by Volume:52.4
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:IN ACCORED W LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.