BDWCN - 744-508
- MSDS: BDWCN
- Manufacturer: PRATT AND LAMBERT WICHITA DIV
- Product Name: 744-508
- National Stock Number: 8010-00-297-0801
Product Identification
Product ID:744-508
MSDS Date:01/01/1985
FSC:8010
NIIN:00-297-0801
MSDS Number: BDWCN
Responsible Party
Emergency Phone: 316-733-1361
Cage: PRATT
Contractor
Telephone: 800-647-2253
Cage: 92216
Ingredients
ALIPHATIC NAPHTHA
Fraction By Weight: 15.0%
ACGIH TLV: 200 PPM
VM&P NAPHTHA
RTECS: SE7525000
Fraction By Weight: 15.0%
ACGIH TLV: 200 PPM
ISOBUTYL ALCOHOL (SARA III)
CAS: 78-83-1
RTECS: NP9625000
Fraction By Weight: 8.0%
OSHA PEL 100 PPM
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
LEAD
Fraction By Weight: 0.2%
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
Fraction By Weight: <5%
OSHA PEL 100 PPM
Hazards
Effects of Overexposure:INHALED: ANESTHETIC, IRRITATES AIRWAY, SKIN/EYE
IRRITATION, HDACHE, DIZZINESS, COMA, CONFUSION
First Aid
First Aid:IN CASE OF CONTACT, FLUSH SKIN AND EYES WITH PLENTY OF WATER.
REMOVE CONTAM CLOTHNG. IF INHALED, REMOVE TO FRESH AIR. CALL MD IF
SYMPTOMS PERSIST. ART RESP IF BRTHNG STOPS
Fire Fighting
Flash Point:13F, -11C TCC
Lower Limits:0.9
Extinguishing Media:CARBON DIOXIDE/DRY CHEMICAL-SMALL. POLYMER
FOAM-LARGE FIRE
Fire Fighting Procedures:SELF-CONTAINED BRTHNG APPAR AVAILABLE FOR
FIREMEN
Unusual Fire/Explosion Hazard:PRESSURE BUILD UP FROM EXTREME HEAT MAY
CAUSE EXPLOSION. USE WATER TO COOL CANS. FOR FIRE-FOG NOZZ
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES, HOT
SURFACES AND ELECTRICAL, STATIC OR FRICTIONAL SPARKS). AVOID BRTHNG
VAPORS. VENTILATE AREA. REMOVE WITH INERT ABSORBENT AND
NON-SPARKING TOOLS
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LG
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS ONE FLAMMABLE (OR COMBUSTIBLE) LIQUID.
Other Precautions:DO NOT TAKE INTERNALLY, CONTAINERS SHOULD BE GROUNDED
WHEN POURING, AVOID FREE FALL IN EXCESS OF A FEW INCHES. DO NOT
FLAME CUT, BRAZE, OR WELD COATED MATERIAL W/O VENTILATION
Exposure Controls
Respiratory Protection:APPROVED BUREAU OF MINES RESPIRATORS W/PROPER
FILTER OR HOOD
Ventilation:GENERAL DILUTION/LOCAL EXHAUST FOR TLV&LEL SAFETY& WELDING
Protective Gloves:ALOT OF CONTACT
Eye Protection:USE EYEWEAR IF SPLASHING
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO CONTAM
CLOTHING
Supplemental Safety and Health
BOILING RANGE 89-143C TOLUENE
<5% BY WT.
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:193-290F
Evaporation Rate & Reference:
Percent Volatiles by Volume:63.0
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FIRES, HEAT, HOT SURFACES, SPARKS,
ELECTRICAL EQUIPMENT
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDEAL REGS. DO NOT INCINERATE CLOSED CONTAINERS. INCINERATE IN
APPROVED FACILITY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.