Product ID:743-612
MSDS Date:01/01/1985
FSC:8010
NIIN:00-297-2120
MSDS Number: BDWGN

PRATT & LAMBERT-WICHITA DIV.

Emergency Phone: 316-733-1361

Cage: KO010

PRATT AND LAMBERT INC

206 KANSAS CITY, MO 64141 US

Cage: 92216

ALIPHATIC NAPHTHA

Fraction By Weight: 15.0%

ACGIH TLV: 200 PPM

VM&P NAPHTHA

RTECS: SE7525000

Fraction By Weight: 15.0%

ACGIH TLV: 200 PPM

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 8.0%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

AROMATIC 100

Fraction By Weight: < 5%

ACGIH TLV: 200 PPM

ISOBUTYL ALCOHOL (SARA III)

CAS: 78-83-1

RTECS: NP9625000

Fraction By Weight: < 5%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Effects of Overexposure:INHALED-ANETHETIC, IRITATE AIRWAY; SKIN/EYE
IRRITATION HEADACHE, DIZZINESS, COMA, CONFUSION.

First Aid:INCASE OF CONTACT, FLUSH SKIN AND EYES WITH PLENTY OF WATER
WHILE REMOVING CONTAMINATED CLOTHING. IF INHALED, REMOVE TO FRESH
AIR. CALL A PHYSICIAN IF SYMPTONS PERSISTS. PERFORM ARTIFICIAL
RESPIRATIO N IF BREATHING HAS STOPPED.

Flash Point:13 F, -11 C TCC
Lower Limits:0.9
Extinguishing Media:CARBON DIOXIDE/DRY CHEMICAL-SMALL; POLYMER
FOAM-LARGE FIRE
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS AVAILABLE
FOR FIREMEN
Unusual Fire/Explosion Hazard:PRESSURE BUILD-UP FROM WXTREME HEAT MAY
CAUSE EXPLOSION. USE WATER TO COOL CANS; FOR FOG NOZZLES.

Spill Release Procedures:REMOVE ALL SOURVES OF IGNITION (FLAMES, HOT
SURFACES, & ELECTRICAL, STATIC, OR FRICTIONAL SPARKS). AVOID
BREATHING VAPORS. VENTILATE AREA. REMOVE WITH INERT ABSORBENT AND
NON-SPARKING TOOLS.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS ONE FLAMMABLE (OR COMBUSTIBLE) LIQUID.
Other Precautions:DO NOT TAKE INTERNALLY, CONTAINERS SHOULD BE GROUNDED
WHEN POURING, AVOID FREE FALL IN EXCESS OF A FEW INCHES, DO NOT
FLAME CUT, BRAZE, OR WELD COATED MATERIAL WITHOUT VENTILATION.

Respiratory Protection:APPROVED BUREAU OF MINES RESPIRATORS W/ PROPER
FILTER OR HOOD.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST FOR TLV&LEL SAFETY &
WELDING.
Protective Gloves:ALOT OF CONTACT
Eye Protection:USE EYEWEAR IF SPLASHING
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING.
Supplemental Safety and Health
BOILING RANGE 89-143 C. EACH OF THE FOLLOWING < 0.5%: METHANOL,
TRIETHYLAMINE, ACETONE, CELLOSOLVE ACETATE MINERAL SPIRITS.

HCC:F2
Boiling Pt:B.P. Text:193-290 F
Evaporation Rate & Reference:< ETHER
Appearance and Odor:GRAY PAINT
Percent Volatiles by Volume:64.0

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FIRES, HEAT, & HOT SURFACES, SPARKS,
ELECTRICAL EQUIPMENT

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. INCINERATE IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.