BDWLF - 745-480

Product Identification

Product ID:745-480
MSDS Date:01/01/1985
FSC:8010
NIIN:00-298-3865
MSDS Number: BDWLF

Responsible Party
AMERON INDUSTRIAL COATINGS DIVISION

Emergency Phone: 316-733-1361

Cage: 09869

Contractor
AMERON INDUSTRIAL COATINGS DIVISION
BREA, CA 92621-3904 US

Telephone: 714-529-4597

Cage: 09869

Ingredients

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 5.0%

OSHA PEL 100 PPM


ISOBUTYL ALCOHOL

Fraction By Weight: 13.0%

ACGIH TLV: 50 PPM


NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 17.0%

OSHA PEL 100 PPM


ETHYL BENZENE

Fraction By Weight: <5%

ACGIH TLV: 100 PPM

Hazards

Effects of Overexposure:INHALED:ANESTHETIC & IRRITATION TO AIRWAY;
IRRITATION-SKIN/EYE CONTACT; HEADACHE,DISSY, COMA

First Aid

First Aid:INCASE OF CONTACT, FLUSH SKIN AND EYES WITH PLENTY OF WATER
WHILE REMOVING CONTAMINATED CLOTHING. IF INHALED, REMOVE TO FRESH
AIR. CALL A PHYSICIAN IF SYMPTONS PERSIST.

Fire Fighting

Flash Point:50F, 10C TCC
Extinguishing Media:CARBON DIOXIDE/DRY CHEMICAL-SMALL; POLYMER
FOAM-LARGE FIRE
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS AVAILABLE
FOR FIREMEN
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HEAT MAY
EXPLODE DUE TO PRESSURE BUILD-UP.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES, HOT
SURFACES, & ELECTRICAL, STATIC, OR FRICTIONAL SPARKS). AVOID
BREATHING VAPORS. VENTILATE AREA. REMOVE WITH INERT ABSORBENT AND
NON-SPARKING TOOLS.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS ONE FLAMMABLE LOR COMBUSTIBLE) LIQUID.
Other Precautions:DO NOT TAKE INTERNALLY, CONTAINERS SHOULD BE GROUNDED
WHEN POURING, AVOID FREE FALL IN EXCESS OF A FEW INCHES, DO NOT
FLAME CUT, BRAZE, OR WELD COATED MATERIAL WITHOUT VENTILATION.

Exposure Controls

Respiratory Protection:APPROVED BUREAU OF MINES RESPIRATORS W/ PROPER
FILTER OR HOOD
Ventilation:GENERAL DILUTION/LOCAL EXHAUST FOR TLV&LEL SAFETY & WELDING
Protective Gloves:ALOT OF CONTACT
Eye Protection:USE EYEWEAR IF SPLASHING
Other Protective Equipment:PREVENT PROL9ONGED SKIN CONTACT TO
CONTAMINATED CLOTHING.
Supplemental Safety and Health
BP 106-189C

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:223-373F
Evaporation Rate & Reference:Percent Volatiles by Volume:60.0

Stability

Stability Condition to Avoid:FIRES, HEAT, & HOT SURFACES

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. INCINERATE IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.