Product ID:MATCOTE 1-837, OFF WHITE
MSDS Date:01/01/1985
FSC:8010
NIIN:00-402-0953
Kit Part:Y
MSDS Number: BDXRP

MATCOTE COMPANY, INC.

6001 ANTOINE
HOUSTON, TX 77018
US

Cage: GO793

MATCOTE COMPANY, INC.

10762 HOUSTON, TX 77018 US

Cage: GO793

METHYL ISOAMYL KETONE

CAS: 110-12-3

RTECS: MP3850000

Fraction By Weight: 20.8%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293

AROMATIC 100

Fraction By Weight: 14.3%

ACGIH TLV: 100 PPM (MFR)

CYCLOHEXANONE (SARA III)

CAS: 108-94-1

RTECS: GW1050000

Fraction By Weight: 2.8%

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 0.7%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ZINC OXIDE

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 2.0%

OSHA PEL 15MG/M3 TDUST/5 FUME

ACGIH TLV: 10MG/M3 TDUST; 9293

Effects of Overexposure:COMP B: SKIN/EYE BURNS. COMP A & COMPOSITE:
SKIN/EYE IRRIT. VAPORS IRRIT EYES & RESP TRACT

First Aid:IMMED FLUSH EYES & SKIN W/PLENTY OF WATER WHILE CONTAMINATED
CLOTHING & SHOES ARE REMOVED. CALL MD. LAUNDER CLOTHING BEFORE
RE-USE. DISCARD GROSSLY CONTAM SHOES. REMOVE TO FRESH AIR. IF NOT
BRTHNG APP LY ARTIFICIAL RESP. CALL MD.

Flash Point:90F SCC (PT A)
Lower Limits:1.0
Upper Limits:12.7
Extinguishing Media:DRY CHEMICAL, FOAM, WATERSPRAY OR WATERFOG
Fire Fighting Procedures:WATERSPRAY TO COOL FIRE EXPOSED SURFACES &
PROTECT PERSONNEL
Unusual Fire/Explosion Hazard:RESPIRATORY PROTECTION REQUIRED FOR FIRE
FIGHTING PERSONNEL

Spill Release Procedures:ELIMINATE SOURCES OF IGNITION. PREVENT LIQ
FROM ENTERING SEWERS, WATERCOURSES, OR LOW AREAS. ADVISE
AUTHORITIES IF SUBSTANCE HAS ENTERED A WATERCOURSE OR SEWER.
CONTAINED SPILLED LIQ W/SAND OR EARTH. RECOVER BY PUMPING OR W/A
SUITABLE ABSORBENT.

Handling and Storage Precautions:KEEP CONTAINER CLSD WHEN NOT IN USE.
KEEP AWAY FROM HEAT, SPARKS & OPEN FLAME.
Other Precautions:TO PROTECT PRODUCT QUALITY AVOID ALL CONTACT
W/MOISTURE. THIS PRODUCT IS EQUIVALENT TO RUST-BAN EX-5705. PART
TWO OF THE KIT,MATCOTE 1-802 IS EQUIV TO RUST-BAN EX-5704.

Respiratory Protection:NIOSH/MSHA APPRVD FULL FACE RESPIRATORY
PROTECTION-MFG.REC.
Ventilation:EXPLOSION-PROOF VENTILATION EQUIPMENT
Protective Gloves:CHEM RESISTANT
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:CHEMICALLY RESISTANT COVERALLS
Supplemental Safety and Health
ADD INGRED: TIO*2 20.3%,5MG/CUM-TLV; CALCIUM CARBONATE 8.5%,
5MG/CUM-TLV; POLYAMIDE RESIN 5.2%; EPOXY 15.4%, FLOW ADDITIVES,
THICKENERS 5.2% VAPRO PRESSURE: 1.8 AT 20C. % VOLATILE:
57.3.KEY1:J1.

Boiling Pt:B.P. Text:280F
Vapor Density:4.1
Spec Gravity:1.21
Evaporation Rate & Reference:0.37 (N BUOAC)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OFF-WHITE LIQ W/CHARACTERISTIC AROMATIC ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ACIDS & ALKALIES
Hazardous Decomposition Products:CO, CO*2, OXIDES OF N.

Waste Disposal Methods:CONSULT AN EXPERT ON DISPOSAL OF RECOVERED
MATERIAL. DISPOSE IAW FED., STATE & LOCAL CODES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.