BFCKZ - G-525 JEL-E-PAK
- MSDS: BFCKZ
- Manufacturer: COMMUNICATIONS TECHNOLOGY CORP
- Product Name: G-525 JEL-E-PAK
- National Stock Number: 5970-00-522-1634
Product Identification
Product ID:G-525 JEL-E-PAK
MSDS Date:01/01/1987
FSC:5970
NIIN:00-522-1634
MSDS Number: BFCKZ
Responsible Party
DALLAS, TX 75244
US
Emergency Phone: 214-991-8338
Info Phone: 214-991-8338
Cage: 57412
Contractor
Telephone: 718-387-4724
Cage: 97412
Ingredients
PETROLEUM HYDROCARBONS (AS AN OIL MIST 80-95%)
Fraction By Weight: 87.5%
ACGIH TLV: 5MG/CUM,OILMIST
Hazards
Effects of Overexposure:NO UNUSUAL EFFECTS TO BE EXPECTED.
First Aid
First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.
Fire Fighting
Flash Point:400F (C.O.C.)
Lower Limits:UNKN
Upper Limits:UNKN
Extinguishing Media:DRY CHEMICALS,CO*2,WATER SPRAY.
Fire Fighting Procedures:NONE SPECIFIED
Unusual Fire/Explosion Hazard:NONE SPECIFIED
Accidental Release
Spill Release Procedures:REMOVE SPILLAGE BY ABSORBING IN ABSORBENT
SWEEPING COMPOUND.
Handling
Handling and Storage Precautions:IN ACCORDANCE WITH GOOD INDUSTRIAL
PRACTICE,HANDLE WITH DUE CARE AND AVOID UNNECESSARY PERSONAL
CONTACT.
Other Precautions:AVOID EYES AND SKIN CONTACT.PROVIDE ADEQUATE
VENTILATION
Exposure Controls
Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY
CONDITIONS/ADEQUATE VENT.
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:PV/RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:FULL PROTECTIVE CLOTHING,SAFETY SHOWER,EYE
WASH STATION
Supplemental Safety and Health
MSDS UNDATED.OTHER PHONE NO(213) 473-0061(NITE LINE)
Chemical Properties
HCC:N1
Vapor Pres:0.1
Vapor Density:1.0
Spec Gravity:0.88
Evaporation Rate & Reference:NONE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PETROLEUM HYDROCARBONS LIQUID.
Percent Volatiles by Volume:NONE
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING
Stability Condition to Avoid:AVOID EXECESSIVE HEAT FOR LONG PERIODS OF
TIME
Hazardous Decomposition Products:FROM INCOMPLETE COMBUSTION CO MAY BE
FORMED
Disposal
Waste Disposal Methods:USE APPROVED INCINERATION OR LAND FILL IN
ACCORDANCE WITH FEDERAL,STATE AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.