Product ID:AMS5825D
MSDS Date:01/01/1987
FSC:3439
NIIN:00-522-2755
MSDS Number: BFCLC

NATIONAL WELDING ALLOYS, INC.

Emergency Phone: 412-781-4255

Cage: 0ACE2

NATIONAL WELDING ALLOYS INC

PITTSBURGH, PA 15215-2624 US

Telephone: 412-781-4255

Cage: 0ACE2

IRON ION (FE +2)

CAS: 15438-31-0

RTECS: NO6925000

Fraction By Weight: 75%

OSHA PEL 1 MG/M3 (FE)

ACGIH TLV: 1 MG/M3 (FE); 8990

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 16.4%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 4.8%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9192

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 3.4%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 0.6%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

Effects of Overexposure:DIZZ,NAU,IRRIT OF NOSE, THROAT, OR EYES. ARC
RAYS CAN BURN SKIN & INJURE EYES. ELECTRIC SHOCK DEADLY

First Aid:RMV TO FRESH AIR. GIVE OXYGEN IF BREATHING DIFF. GIVE CPR IF
NOT BREATHING. GET MED ATTN IF REQD.

Fire Fighting Procedures:WEAR SCBA & PROTECTIVE EQUIPMENT
Unusual Fire/Explosion Hazard:WELDING ARC&SPARKS CAN IGNITE
COMBUSTIBLES

Handling and Storage Precautions:STORE IN DRY AREA.
Other Precautions:USE ARM PROTECT,APRONS,HATS,SHOULDER PROTECTION &
SUBSTANTIAL CLOTHING, WELDER SHOULD INSULATE HIMSELF FM WORK &
GROUND.

Ventilation:USE LOCAL AT ARC & MECHANICAL TO KEEP FUMES BELOW TLV
Protective Gloves:WELDING
Eye Protection:HELMET W/#10 SHADE LENS.
Other Protective Equipment:BODY PROTECTION FOR RADIATION,SPARKS & ELECT
SHOCK
Supplemental Safety and Health
MSDS NOT DATED

HCC:N1
Vapor Pres:0
Spec Gravity:7.86
Solubility in Water:NEGLIGIBLE
Appearance and Odor:STEEL GRAY METAL RODS. NO ODOR
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EXPOSURE TO WELDING FUMES & ARC.
Hazardous Decomposition Products:TOXIC FUMES WHEN WELDING,
CO,CO*2,OZONE, NITROGEN OXIDES

Waste Disposal Methods:DISPOSE AS METAL SCRAP, CONSIDERED NON-HAZARDOUS
WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.