BFDCL - 24241-GREEN
- MSDS: BFDCL
- Manufacturer: PRATT AND LAMBERT
- Product Name: 24241-GREEN
- National Stock Number: 8010-00-530-5569
Product Identification
Product ID:24241-GREEN
MSDS Date:01/01/1985
FSC:8010
NIIN:00-530-5569
MSDS Number: BFDCL
Responsible Party
Emergency Phone: 316-733-1361
Cage: PRATT
Contractor
Telephone: 216-566-2902
Cage: 61196
Ingredients
MINERAL SPIRITS
CAS: 64475-85-0
RTECS: PY8240000
Fraction By Weight: 35%
ACGIH TLV: 500 PPM
LEAD CHROMATE PIGMENT
Fraction By Weight: <5%
OSHA PEL 0.05 MG/M3 (PB)
ACGIH TLV: 0.05MG/M3(CR)A2;8990
LEAD NAPHTHENATE-36%
Fraction By Weight: <5%
ACGIH TLV: 0.500 G/GK
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
OSHA PEL 200 PPM
ACGIH TLV: 200 PPM/300STEL;9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Effects of Overexposure:IRRIT OF NOSE,THROAT,EYES & POSS DIZZINESS &
NAUSEA.SPRAY MIST CONTN LEAD.
First Aid
First Aid:INHAL:REMOVE FR EXPOSR & PROVID FRESH AIR.SPLASH EYES-FLUSH
IMMED W/LG AMTS OF WATER FOR 15 MIN.SPLASH SKIN:REMOV CONTAM
CLOTHING & WASH ALL AFFECT AREA W/WATR.INGEST:DO NOT INDUC
VOMITNG.CONSULT A DR . IMMED IN ALL CASES.
Fire Fighting
Flash Point:104 F 40 C TCC
Extinguishing Media:CLASS B EXTING, CARBON DIOXIDE, DRY CHEM OR ALCOHOL
FOAM
Fire Fighting Procedures:SELF CONTAINED BREATH APPARAT WATER MAY BE
INEFECTIVE.
Unusual Fire/Explosion Hazard:KEEP CONTNRS TIGHTHLY CLOS.ISOLAT FE
HEAT,ELECTR EQPMT,SPARKS & OPN FLAME.DO NOT APPLY TO VRYHOT SUR
Accidental Release
Spill Release Procedures:REMOV ALL SOURCES OF IGNIT (FLAMES,HOT
SURFACES,ELECTRICAL, STATIC OR FRICTIONAL SPARKS).VENTILAT AREA &
AVOID BREATHING VAPORS.REMOV W/ INERT ABSORB & NON-SPARKING
TOOLS.STEPS MUST BE TAKN TO PREVNT CONTAM OF GROUND WATR OR
STREAMS.
Handling
Handling and Storage Precautions:DO NOT STORE ABOV 120 F.STORE LG
QUANTITIES IN COMPLIA W/OSHA 1910.106.CONTNRS SHLD BE GROUNDED &
BONDED TO THE RECEIVING CONTNR.
Other Precautions:DO NOT CUT OR WELD ON EMPTY CONTAINER. DO NOT USE
UNTIL ALL SAFETY PRECAUTIONS HAVE BEEN READ & FULLY UNDERSTOOD BY
THE USER.
Exposure Controls
Respiratory Protection:NIOSH APPRVD MECH RESPIRAT TO REMOV OVERSPRAY
WHN SPRAYING IN OUTDR
Ventilation:PROVID GEN DILUT/LOC EXHAUST VENT TO KP CONCENT BELO ACEP
TL
Protective Gloves:SOLVENT,IMPERME
Eye Protection:SAFETY EYEWR
Other Protective Equipment:PROTECTV EQPMT TO PRVNT SKN CONTCT.SE
OSHA,29 CFR 1910.1025
Supplemental Safety and Health
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:311-373F
Vapor Density:>AIR
Evaporation Rate & Reference:
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTCT W/STRONG ACIDS OR AKALINE MATERIALS.
Stability Condition to Avoid:FIRES,HEAT & HOT SURFACES.
Hazardous Decomposition Products:BURNING WILL PRODUCE SMOKE & OXIDES OF
CARBON & LEAD.
Conditions to Avoid Polymerization:DO NOT ADD DRIERS OR REACTIV CHEM
W/O TECHN SUPERVISION.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORD W/LOCAL,STATE & FEDERAL
REGULATIONS.INCINERATIN EPA APPRVD FACILITY.DO NOT INCINERAT CLOSED
CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.