Product ID:SN60WRP2
MSDS Date:09/01/1986
FSC:3439
NIIN:00-555-4629
MSDS Number: BFFGF

BOW SOLDER PRODUCTS CO.

Emergency Phone: (201)686-6040

Cage: 52329

BOW ELECTRONIC SOLDERS

SAYREVILLE, NJ 08872 US

Telephone: 732-316-2177

Cage: 52329

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 61.5%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 37.53%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ROSIN PERCENT TAKEN FROM QQ-S-571 TABLE III

Fraction By Weight: 2.2%

Effects of Overexposure:MET.TASTE,ABD.PAIN,NAUSEA,JOINT/MUSCLE PAIN OR
WEAK,LOSS OF WEIGHT,MENTAL CONFUSION,LEAD LINE OF GUM

First Aid:REMOVE FROM AREA.SEE DOCTOR;IF BURNED FROM MOLTEN METAL,GIVE
ORDINARY BURN FIRST AID.DO NOT REMOVE ROSIN FROM 2ND OR 3RD DEGREE
BURNS.USE SOLVENTS TO REMOVE ROSIN FROM MINOR FIRST DEGREE BURNS.

Flash Point:SEE SUPPL.DATA
Fire Fighting Procedures:LEAD EMITS TOX.FUMES,WEAR SCBA-CORE:TREAT AS
CLASS B FIRE.
Unusual Fire/Explosion Hazard:MOD.HAZ.WHEN HIGH CONC.OF FINE MET.DUST
EXPOSD TO HIGH HEAT/OPEN FLAME;CORE:HOT LIQ.ROSIN FOAM W.WTR

Spill Release Procedures:VACUUM OR WET SWEEP USING A RESP. & PROTECTIVE
CLOTHING.

Handling and Storage Precautions:USE GOOD HOUSEKEEPING PRACTICES TO
PREVENT DUST ACCUMULATION & TO KEEP AIRBORNE DUST CONC.AT A
MIN.AVOID BREATHING DUST OR FUME.
Other Precautions:WASH HANDS AFTER HANDLING.DO NOT SMOKE OR EXPOSE FOOD
TO DUST--REFER TO OSHA STD 29CFR 1910.1025 FOR REQUIREMENTS OF
EMPLOYEES EXPOSURE TO LEAD.

Respiratory Protection:NIOSH APPVD RESP IF TLV IS EXCEEDED.
Ventilation:PROVIDE MECHAN(GEN/LOCAL EXHAUST)VENT TO MAINTN Protective Gloves:WELDER'S GLOVES
Eye Protection:SFTY GLASSES/FACE SHIELD
Other Protective Equipment:SAFETY SHOWER & EYE BATH
Supplemental Safety and Health
UNDATED MSDS/%VOLATILE FOR CORE ONLY 10-25%/FLASH PT FOR CORE ONLY
300F,149C/

HCC:N1
Spec Gravity:>1
Solubility in Water:INSOLUBLE
Appearance and Odor:CORE:CLR SOLID,ROSIN ODOR;SOLDR:SOLID,GRAY-TO-SILV
Percent Volatiles by Volume:SUPP

Stability Indicator/Materials to Avoid:YES
ACIDS,BASES,OXIDIZERS-MOLTEN METAL REACTS VIOLENTLY W.WATER
Stability Condition to Avoid:NONE SPECIFIED
Hazardous Decomposition Products:TEMP.ABOVE MELTING POINT EMIT TOXIC
FUMES.

Waste Disposal Methods:STORE IN CLOSED CONTAINER AND RETURN TO LEAD
RECYCLER.FOLLOW LOCAL,STATE,FEDERAL REGS REGARDING DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.