BFGKV - 745-756
- MSDS: BFGKV
- Manufacturer: AMERON INDUSTRIAL COATINGS DIV
- Product Name: 745-756
- National Stock Number: 8010-00-584-3080
Product Identification
Product ID:745-756
MSDS Date:01/01/1985
FSC:8010
NIIN:00-584-3080
MSDS Number: BFGKV
Responsible Party
Emergency Phone: 316-733-1361
Cage: 09869
Contractor
Telephone: 714-529-4597
Cage: 09869
Ingredients
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
Fraction By Weight: 5.0%
OSHA PEL 100 PPM
ISOBUTYL ALCOHOL
Fraction By Weight: 10.0%
ACGIH TLV: 50 PPM
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
Fraction By Weight: 20.0%
OSHA PEL 100 PPM
HYL BENZENE
Fraction By Weight: <5%
ACGIH TLV: 100 PPM
CELLOSOLVE ACETATE
Fraction By Weight: < 5%
ACGIH TLV: 100 PPM
Hazards
Effects of Overexposure:INHALE:ANESTHETIC & IRRITATION TO AIRWAY;
IRRITATION-SKIN/EYE CONTACT; HEADACHE, DISSY, COMA.
First Aid
First Aid:INCASE OF CONTACT, FLUSH SKIN AND EYES WITH PLENTY OF WATER
WHILE REMOVING CONTAMINATED CLOTHING. IF INHALED, REMOVE TO FRESH
AIR. CALL A PHYSICIAN IF SYMPTONS PERSIST.
Fire Fighting
Flash Point:50F, 10C TCC
Lower Limits:0.9
Extinguishing Media:CARBON DIOXIDE/DRY CHEMICAL-SMALL; POLYMER
FOAM-LARGE FIRE
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS AVAILABLE
FOR FIREMEN
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HEAT MAY
EXPLODE DUE TO PRESSURE BUILD-UP.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES, HOT
SURFACES, & ELECTRICAL, STATIC, OR FRICTIONAL SPARKS). AVOID
BREATHING VAPORS. VENTILATE AREA. REMOVE WITH INERT ABSORBENT AND
NON-SPARKING TOOLS.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS ONE FLAMMALBE LOR COMBUSTIBLE) LIQUID.
Other Precautions:DO NOT TAKE INTERNALLY, CONTAINERS SHOULD BE GROUNDED
WHEN POURING, AVOID FREE FALL IN EXCESS OF A FEW INCHES, DO NOT
FLAME CUT, BRAZE, OR WELD COATED MATERIAL WITHOUT VENTILATION.
Exposure Controls
Respiratory Protection:APPROVED BUREAU OF MINES RESPIRATORS W/ PROPER
FILTER OR HODD
Ventilation:GENERAL DILUTION/LOCAL EXHAUST FOR TLV&LEL SAFETY &
WELDING.
Protective Gloves:ALOT OF CONTACT
Eye Protection:USE EYEWEAR IF SPLASHING
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING.
Supplemental Safety and Health
BP 106-189C
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:223-373F
Evaporation Rate & Reference:< ETHER
Percent Volatiles by Volume:60.0
Stability
Stability Condition to Avoid:FIRES, HEAT, & HOT SURFACES
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. INCINERATE IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.